PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 81001-6
81001-6 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The WRENCH,TORQUE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, overall_length: 8.812 INCHES NOMINAL IN, drive_end_shape: DOVETAIL SINGLE END EXTERNAL, torque_capacity: 60.0 INCH-POUNDS MINIMUM AND 300.0 INCH-POUNDS MAXIMUM IN, special_features: PLAIN HEAD; RUBBER GRIP HANDLE, surface_treatment: CHROMIUM OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-033-8130, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
81001-6
NSN: 5340-01-033-8130
FSC: 5340
CAGE: 04901 — BOONTON ELECTRONICS CORPORATION DIV BOONTON ELECTRONICS (USA)
SPECIFICATIONS
materialSTEEL OVERALL
overall_length8.812 INCHES NOMINAL IN
drive_end_shapeDOVETAIL SINGLE END EXTERNAL
torque_capacity60.0 INCH-POUNDS MINIMUM AND 300.0 INCH-POUNDS MAXIMUM IN
special_featuresPLAIN HEAD; RUBBER GRIP HANDLE
surface_treatmentCHROMIUM OVERALL
torque_signal_methodAUDIBLE AND FEEL IMPULSE
nondefinitive_spec/std_data1 TYPE
specification/standard_data81343-SAE AS28431 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
torque_indicating_mechanismPRESET-ADJUSTABLE
NSN5340-01-033-8130
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 81001-6 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
TECHNICAL CHARACTERISTICS (FLIS)
PART NAME ASSIGNED BY CONTROLLING AGENCYPOST,ELECTRICAL-MECHANICAL EQUIPMENT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
10044-19Interchangeable
interchangeable cross-reference
interchangeable
81001-6Interchangeable
interchangeable cross-reference
interchangeable
10352636Interchangeable
interchangeable cross-reference
interchangeable
AS28431Interchangeable
interchangeable cross-reference
interchangeable
B107.14 TY2CLAST3DEAInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 81001-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 81001-6?
81001-6 is a WRENCH,TORQUE.
What parts can replace 81001-6?
There are 5 known substitutes for 81001-6: 10044-19, 81001-6, 10352636 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 81001-6?
81001-6 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-033-8130. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 81001-6

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026