PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 8100-46
8100-46 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The WRENCH,TORQUE is a the manufacturer industrial component. Key specifications include end_item_identification: BENCH STOCK MAINTENANCE SHOP, part_name_assigned_by_controlling_agency: TORQUE WRENCH. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-285-8388, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8100-46
NSN: 5330-00-285-8388
FSC: 5330
CAGE: 31577 — JAEGER MACHINE CO (USA)
SPECIFICATIONS
end_item_identificationBENCH STOCK MAINTENANCE SHOP
part_name_assigned_by_controlling_agencyTORQUE WRENCH
NSN5330-00-285-8388
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8100-46 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEALING ELEMENT STYLE: ANGULAR
•
SEAL WIDTH: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
•
ACCOMMODATED SHAFT DIAMETER: 1.875 INCHES NOMINAL IN
•
MATERIAL: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
HOUSING BORE DIAMETER: 2.996 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SEALING ELEMENT STYLEANGULAR
SEAL WIDTH0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
ACCOMMODATED SHAFT DIAMETER1.875 INCHES NOMINAL IN
MATERIALLEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
CASE STYLESQUARE
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
HOUSING BORE DIAMETER2.996 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 31
50084Interchangeable
interchangeable cross-reference
interchangeable
LS4029Interchangeable
interchangeable cross-reference
interchangeable
QQ-A-200/11Interchangeable
interchangeable cross-reference
interchangeable
93881-26Interchangeable
interchangeable cross-reference
interchangeable
00929-2Interchangeable
interchangeable cross-reference
interchangeable
432-26Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 8100-46?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8100-46?
8100-46 is a WRENCH,TORQUE.
What parts can replace 8100-46?
There are 31 known substitutes for 8100-46: 50084, LS4029, QQ-A-200/11 and 28 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 8100-46?
8100-46 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-285-8388. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8100-46

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026