PartsTable
Technical Data Sheet
Download PDF

810-5000HM — RESISTOR,VARIABLE,WIRE WOUND,NON

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

810-5000HM: RESISTOR,VARIABLE,WIRE WOUND,NON.

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include body_style: CYLINDRICAL SERVO MOUNTED, body_length: 2.000 INCHES NOMINAL IN, shaft_style: ROUND, shaft_length: 0.812 INCHES NOMINAL IN, actuator_type: SINGLE SHAFT, body_diameter: 1.812 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-059-4793, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 810-5000HM
NSN: 5905-00-059-4793
NIINs: 000594793, 010196858
FSC: 5905 — Resistor
CAGE: 02111 — VISHAY SPRAGUE INC (USA)
SPECIFICATIONS
body_styleCYLINDRICAL SERVO MOUNTED
body_length2.000 INCHES NOMINAL IN
shaft_styleROUND
shaft_length0.812 INCHES NOMINAL IN
actuator_typeSINGLE SHAFT
body_diameter1.812 INCHES NOMINAL IN
overall_length2.812 INCHES NOMINAL IN
shaft_diameter0.250 INCHES NOMINAL IN
mounting_methodSTANDARD BUSHING
overall_diameter2.031 INCHES NOMINAL IN
section_quantity1
special_featuresTERMINAL TYPE,TURRET
NSN5905-00-059-4793
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RESISTOR,VARIABLE,WIRE WOUND,NON TITLE COMPONENT PN 810-5000HM MFR RESISTOR,VARIABLE,WIRE
KEY FEATURES
•
MAXIMUM RUNNING TORQUE: 1.75 INCH-OUNCES IN
•
BODY DIAMETER: 1.812 INCHES NOMINAL IN
•
SCREW THREAD QUANTITY PER INCH: 32.0
•
ELECTRICAL RESISTANCE PER SECTION: 500.0 OHMS SINGLE SECTION
•
SECTION QUANTITY: 1
•
SHAFT DIAMETER: 0.250 INCHES NOMINAL IN
•
FUNCTION CHARACTERISTIC PER SECTION: SINGLE SECTION LINEAR
•
BODY STYLE: CYLINDRICAL BUSHING MOUNTED
TECHNICAL CHARACTERISTICS
MAXIMUM RUNNING TORQUE1.75 INCH-OUNCES IN
BODY DIAMETER1.812 INCHES NOMINAL IN
SCREW THREAD QUANTITY PER INCH32.0
ELECTRICAL RESISTANCE PER SECTION500.0 OHMS SINGLE SECTION
SECTION QUANTITY1
SHAFT DIAMETER0.250 INCHES NOMINAL IN
FUNCTION CHARACTERISTIC PER SECTIONSINGLE SECTION LINEAR
BODY STYLECYLINDRICAL BUSHING MOUNTED
FUNCTION CONFORMITY TOLERANCE PER SECTION-0.10 TO 0.10 SINGLE SECTION
OVERALL DIAMETER2.031 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
418888-03REVAReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 810-5000HM?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 810-5000HM?
810-5000HM is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).
What parts can replace 810-5000HM?
There is 1 known substitute for 810-5000HM: 418888-03REVA. Substitute compatibility should be verified for your specific system.
What is the NSN for 810-5000HM?
810-5000HM is cataloged in the U.S. Government catalog under NSN 5905-00-059-4793. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 810-5000HM

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.