PartsTable
Technical Data Sheet
Download PDF

810-1385992 REV — FLANGE,PIPE

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

810-1385992 REV: FLANGE,PIPE.

The FLANGE,PIPE is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY 922, thickness: 0.938 INCHES NOMINAL IN, neck_height: 1.874 INCHES NOMINAL IN, flange_diameter: 6.125 INCHES NOMINAL IN, style_designator: ROUND, ONE BOLT HOLE CIRCLE, bolt_hole_diameter: 0.688 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 4730-01-319-1412, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
810-1385992 REV
NSN: 4730-01-319-1412
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 80064 — NAVAL SHIP SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialCOPPER ALLOY 922
thickness0.938 INCHES NOMINAL IN
neck_height1.874 INCHES NOMINAL IN
flange_diameter6.125 INCHES NOMINAL IN
style_designatorROUND, ONE BOLT HOLE CIRCLE
bolt_hole_diameter0.688 INCHES NOMINAL IN
bolt_hole_quantity6
bolt_circle_diameter5.000 INCHES NOMINAL IN
flange_section_stylePLAIN FACE, WELDING NECK
face_seating_surface_conditionMACHINED
material_document_and_classificationQQ-C-390,ALLOY 922 FED SPEC SINGLE MATERIAL RESPONSE
nominal_pipe_size_for_which_designed2.500 INCHES IN
NSN4730-01-319-1412
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: 810-1385992 REV · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE DIAMETER: 6.125 INCHES NOMINAL IN
•
FACE SEATING SURFACE CONDITION: MACHINED
•
NOMINAL PIPE SIZE FOR WHICH DESIGNED: 2.500 INCHES IN
•
MAXIMUM OPERATING TEMP AND MEDIA FOR WHICH DESIGNED: 150.0 FAHRENHEIT GAS AND 150.0 FAHRENHEIT OIL AND 150.0 FAHRENHEIT WATER DEGF
•
OPERATING PRESSURE AND TYPE: 250.0 POUNDS PER SQUARE INCH (PSI) GAS MAXIMUM REQUIRED AND 250.0 POUNDS PER SQUARE INCH (PSI) OIL MAXIMUM REQUIRED AND 250.0 POUNDS PER SQUARE INCH (PSI) WATER MAXIMUM REQUIRED LOCATION NOT OTHERWISE SPECIFIED LBS
•
FLANGE SECTION STYLE: PLAIN FACE, WELDING NECK
•
STYLE DESIGNATOR: ROUND, ONE BOLT HOLE CIRCLE
•
BOLT HOLE DIAMETER: 0.688 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
FLANGE DIAMETER6.125 INCHES NOMINAL IN
FACE SEATING SURFACE CONDITIONMACHINED
NOMINAL PIPE SIZE FOR WHICH DESIGNED2.500 INCHES IN
MAXIMUM OPERATING TEMP AND MEDIA FOR WHICH DESIGNED150.0 FAHRENHEIT GAS AND 150.0 FAHRENHEIT OIL AND 150.0 FAHRENHEIT WATER DEGF
OPERATING PRESSURE AND TYPE250.0 POUNDS PER SQUARE INCH (PSI) GAS MAXIMUM REQUIRED AND 250.0 POUNDS PER SQUARE INCH (PSI) OIL MAXIMUM REQUIRED AND 250.0 POUNDS PER SQUARE INCH (PSI) WATER MAXIMUM REQUIRED LOCATION NOT OTHERWISE SPECIFIED LBS
FLANGE SECTION STYLEPLAIN FACE, WELDING NECK
STYLE DESIGNATORROUND, ONE BOLT HOLE CIRCLE
BOLT HOLE DIAMETER0.688 INCHES NOMINAL IN
NECK HEIGHT1.874 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-C-390,ALLOY 922 FED SPEC SINGLE MATERIAL RESPONSE
SUBSTITUTES & CROSS-REFERENCES 2
810-1385992Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
1385992-801Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 810-1385992 REV?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 810-1385992 REV?
810-1385992 REV is a FLANGE,PIPE.
What parts can replace 810-1385992 REV?
There are 2 known substitutes for 810-1385992 REV: 810-1385992, 1385992-801. Substitute compatibility should be verified for your specific system.
What is the NSN for 810-1385992 REV?
810-1385992 REV is cataloged in the U.S. Government catalog under NSN 4730-01-319-1412. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 810-1385992 REV

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.