PartsTable
Technical Data Sheet
PartsTable / MRO / 810-100
810-100 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Stranded for flexible routing, solid for conduit THHN/THWN dual-rated — check both tables
Ampacity depends on installation method
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,PRE. Key specifications include material: STEEL OVERALL, overall_length: 6.875 INCHES NOMINAL IN, drive_end_shape: DOVETAIL SINGLE END EXTERNAL, torque_capacity: 0.0 INCH-POUNDS MINIMUM AND 50.0 INCH-POUNDS MAXIMUM IN, special_features: PLAIN HEAD; RUBBER GRIP HANDLE, surface_treatment: CHROMIUM OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 6145-01-139-5172, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 810-100
NSN: 6145-01-139-5172
FSC: 6145
CAGE: 94142 — PHELPS DODGE INDUSTRIES INC PHELPS DODGE CABLE AND WIRE (USA)
SPECIFICATIONS
materialSTEEL OVERALL
overall_length6.875 INCHES NOMINAL IN
drive_end_shapeDOVETAIL SINGLE END EXTERNAL
torque_capacity0.0 INCH-POUNDS MINIMUM AND 50.0 INCH-POUNDS MAXIMUM IN
special_featuresPLAIN HEAD; RUBBER GRIP HANDLE
surface_treatmentCHROMIUM OVERALL
torque_signal_methodAUDIBLE AND FEEL IMPULSE
torque_indicating_mechanismPRESET-ADJUSTABLE
NSN6145-01-139-5172
COMPONENT DIAGRAM
WIRE / CABLE — AMPACITY DEPENDS ON INSTALLATION CROSS-SECTION JACKET WIRE SPECIFICATIONS Conductor Size: — Conductor Count: — Voltage Rating: — Insulation: — Temp Rating: — PN: 810-100 · OEM ⚠ VERIFY BEFORE ORDERING Ampacity depends on installation method — conduit ≠ free air ≠ underground. Same wire, different ratings. AWG sizing is inverse — smaller number = thicker wire (4 AWG > 12 AWG) ✓ BROKER TIP Stranded = flexible routing and vibration resistance. Solid = fixed conduit runs only. THHN/THWN = dual rated — check both dry and wet ampacity tables PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS SECTION OUTSIDE DIAMETER: 0.085 INCHES NOMINAL IN
•
CONDUCTOR FORM: SOLID SINGLE CONDUCTOR
•
PRECIOUS MATERIAL AND LOCATION: SURFACE SINGLE CONDUCTOR SILVER
•
PRECIOUS MATERIAL: SILVER
•
ROUND CONDUCTOR SIZE: 24 AWG SINGLE CONDUCTOR
•
MATERIAL: COPPER FIRST POSITION CONDUCTOR SINGLE CONDUCTOR
•
SURFACE TREATMENT: SILVER CORE CONDUCTOR SINGLE CONDUCTOR
•
CONDUCTOR ARRANGEMENT AND QUANTITY: 1 COAXIAL
TECHNICAL CHARACTERISTICS (FLIS)
CROSS SECTION OUTSIDE DIAMETER0.085 INCHES NOMINAL IN
CONDUCTOR FORMSOLID SINGLE CONDUCTOR
PRECIOUS MATERIAL AND LOCATIONSURFACE SINGLE CONDUCTOR SILVER
PRECIOUS MATERIALSILVER
ROUND CONDUCTOR SIZE24 AWG SINGLE CONDUCTOR
MATERIALCOPPER FIRST POSITION CONDUCTOR SINGLE CONDUCTOR
SURFACE TREATMENTSILVER CORE CONDUCTOR SINGLE CONDUCTOR
CONDUCTOR ARRANGEMENT AND QUANTITY1 COAXIAL
MATERIALSTEEL CORE CONDUCTOR SINGLE CONDUCTOR
CROSS-SECTIONAL SHAPE STYLEROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
CL/50087TUpgraded Successor
successor cross-reference
successor
132A041304Upgraded Successor
successor cross-reference
successor
UT85SJUpgraded Successor
successor cross-reference
successor
810-100Interchangeable
interchangeable cross-reference
interchangeable
860-0336Interchangeable
interchangeable cross-reference
interchangeable
810-903Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 810-100?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 810-100?
810-100 is a RESISTOR,VARIABLE,WIRE WOUND,PRE. It is classified as a MRO (MRO_GENERAL).
What parts can replace 810-100?
There are 16 known substitutes for 810-100: CL/50087T, 132A041304, UT85SJ and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 810-100?
810-100 is cataloged in the Federal Logistics Information System (FLIS) under NSN 6145-01-139-5172. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 810-100

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026