PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 810-005-096
810-005-096 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN is a the manufacturer industrial component. Key specifications include material: STEEL SPRING, seal_width: 1.379 INCHES NOMINAL IN, construction: SOLID, outside_diameter: 1.379 INCHES NOMINAL IN, surface_treatment: PLASTIC CASE, housing_bore_diameter: 1.375 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-034-7268, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
810-005-096
NSN: 5330-01-034-7268
FSC: 5330
CAGE: 51729 — DRESSER, INC. DBA DRESSER ROOTS BLOWERS & COMPRESSORS DIV DRESSER ROOTS (USA)
SPECIFICATIONS
materialSTEEL SPRING
seal_width1.379 INCHES NOMINAL IN
constructionSOLID
outside_diameter1.379 INCHES NOMINAL IN
surface_treatmentPLASTIC CASE
housing_bore_diameter1.375 INCHES NOMINAL IN
accommodated_shaft_diameter0.656 INCHES NOMINAL IN
cross-sectional_shape_styleSINGLE LIP
NSN5330-01-034-7268
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 810-005-096 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SINGLE LIP
•
SEAL WIDTH: 1.379 INCHES NOMINAL IN
•
CONSTRUCTION: SOLID
•
HOUSING BORE DIAMETER: 1.375 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 1.379 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT DIAMETER: 0.656 INCHES NOMINAL IN
•
SURFACE TREATMENT: PLASTIC CASE
•
MATERIAL: STEEL SPRING
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLESINGLE LIP
SEAL WIDTH1.379 INCHES NOMINAL IN
CONSTRUCTIONSOLID
HOUSING BORE DIAMETER1.375 INCHES NOMINAL IN
OUTSIDE DIAMETER1.379 INCHES NOMINAL IN
ACCOMMODATED SHAFT DIAMETER0.656 INCHES NOMINAL IN
SURFACE TREATMENTPLASTIC CASE
MATERIALSTEEL SPRING
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
6556Interchangeable
IBM 6-Slot PCI Riser Card
interchangeable
104540-1Interchangeable
interchangeable cross-reference
interchangeable
10-20076-7Interchangeable
interchangeable cross-reference
interchangeable
147540Interchangeable
interchangeable cross-reference
interchangeable
74454Interchangeable
interchangeable cross-reference
interchangeable
FDC3270-3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 810-005-096?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 810-005-096?
810-005-096 is a SEAL,PLAIN.
What parts can replace 810-005-096?
There are 12 known substitutes for 810-005-096: 6556, 104540-1, 10-20076-7 and 9 more. Substitute compatibility should be verified for your specific system.
Is 810-005-096 still available?
810-005-096 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 810-005-096

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026