PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 81-113
81-113 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The TEE,PIPE is a the manufacturer industrial component. Key specifications include end_item_identification: CVN 78 PWH SINE528 CONTROLLER, part_name_assigned_by_controlling_agency: BLOWER,GASKET. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-083-1818, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
81-113
NSN: 5310-00-083-1818
FSC: 5310
CAGE: 73734 — FEDERAL SCREW PRODUCTS, INC. (USA)
SPECIFICATIONS
end_item_identificationCVN 78 PWH SINE528 CONTROLLER
part_name_assigned_by_controlling_agencyBLOWER,GASKET
NSN5310-00-083-1818
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 81-113 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PILOT DIAMETER: 0.220 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN
•
THREAD CLASS: 3B
•
THREAD SERIES: UNJC
•
WIDTH ACROSS FLATS: 0.305 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
NOMINAL THREAD SIZE: 0.138 INCHES IN
•
NUT COUNTERBORE DEPTH: 0.090 INCHES MINIMUM AND 0.100 INCHES MAXIMUM NUT IN
•
COUNTERBORE DIAMETER: 0.165 INCHES MINIMUM AND 0.170 INCHES MAXIMUM NUT IN
TECHNICAL CHARACTERISTICS (FLIS)
PILOT DIAMETER0.220 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN
THREAD CLASS3B
THREAD SERIESUNJC
WIDTH ACROSS FLATS0.305 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN
SURFACE TREATMENTPASSIVATE OVERALL
NOMINAL THREAD SIZE0.138 INCHES IN
NUT COUNTERBORE DEPTH0.090 INCHES MINIMUM AND 0.100 INCHES MAXIMUM NUT IN
COUNTERBORE DIAMETER0.165 INCHES MINIMUM AND 0.170 INCHES MAXIMUM NUT IN
NUT STYLECLINCH
THREAD QUANTITY PER INCH32
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
81W376-103Interchangeable
interchangeable cross-reference
interchangeable
8P171FInterchangeable
interchangeable cross-reference
interchangeable
81-0113-203Interchangeable
interchangeable cross-reference
interchangeable
GGG-S-326 TY14CLAInterchangeable
interchangeable cross-reference
interchangeable
GGG-S-326Interchangeable
interchangeable cross-reference
interchangeable
5120-00-892-5319Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 81-113?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 81-113?
81-113 is a TEE,PIPE.
What parts can replace 81-113?
There are 8 known substitutes for 81-113: 81W376-103, 8P171F, 81-0113-203 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 81-113?
81-113 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-083-1818. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 81-113

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026