PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 80C06-5-1AA
80C06-5-1AA ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The FASTENER ASSEMBLY,TURNLOCK is a the manufacturer industrial component. Key specifications include diameter: 0.500 INCHES NOMINAL IN, drive_type: CROSS RECESS, grip_length: 0.840 INCHES MAXIMUM IN, mounting_style: PLAIN W/MOUNTING HOLE, receptacle_width: 0.625 INCHES MAXIMUM IN, stud_head_height: 0.125 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5325-00-284-2146, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
80C06-5-1AA
NSN: 5325-00-284-2146
FSC: 5325
CAGE: 71286 — HOWMET GLOBAL FASTENING SYSTEMS INC DIV CAMLOC PRODUCTS (USA)
SPECIFICATIONS
diameter0.500 INCHES NOMINAL IN
drive_typeCROSS RECESS
grip_length0.840 INCHES MAXIMUM IN
mounting_stylePLAIN W/MOUNTING HOLE
receptacle_width0.625 INCHES MAXIMUM IN
stud_head_height0.125 INCHES MAXIMUM IN
receptacle_height0.625 INCHES MAXIMUM IN
surface_treatmentCADMIUM AND CHROMATE OVERALL
turnlock_stud_head_styleFLAT FILLISTER
receptacle_overall_length1.135 INCHES MAXIMUM IN
stud_shank_major_diameter0.373 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
turnlock_receptacle_styleRECEPTACLE
NSN5325-00-284-2146
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 80C06-5-1AA · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DIAMETER: 0.500 INCHES NOMINAL IN
•
TURNLOCK MOUNTING HOLE DIAMETER: 0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN
•
GRIP LENGTH: 0.840 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 1008 OR STEEL COMP 1010 OR STEEL COMP 1012 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1025 OR STEEL COMP 1030 OR STEEL COMP 1035 OR STEEL COMP 1040 OR STEEL COMP 1045 OR STEEL COMP 1050 OR STEEL COMP 1055 OR STEEL COMP 1060 OR STEEL COMP 1095 OVERALL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
TURNLOCK STUD SHANK STYLE: STUD SHANK
•
NONDEFINITIVE SPEC/STD DATA: 2 TYPE
•
STUD HEAD HEIGHT: 0.125 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
DIAMETER0.500 INCHES NOMINAL IN
TURNLOCK MOUNTING HOLE DIAMETER0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN
GRIP LENGTH0.840 INCHES MAXIMUM IN
MATERIALSTEEL COMP 1008 OR STEEL COMP 1010 OR STEEL COMP 1012 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1025 OR STEEL COMP 1030 OR STEEL COMP 1035 OR STEEL COMP 1040 OR STEEL COMP 1045 OR STEEL COMP 1050 OR STEEL COMP 1055 OR STEEL COMP 1060 OR STEEL COMP 1095 OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
TURNLOCK STUD SHANK STYLESTUD SHANK
NONDEFINITIVE SPEC/STD DATA2 TYPE
STUD HEAD HEIGHT0.125 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
DRIVE TYPECROSS RECESS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
80S01-5-1AAInterchangeable
interchangeable cross-reference
interchangeable
MS17731-5Interchangeable
interchangeable cross-reference
interchangeable
MIL-F-22978Interchangeable
interchangeable cross-reference
interchangeable
8-02-00-3Interchangeable
interchangeable cross-reference
interchangeable
FX10-1556-3PInterchangeable
interchangeable cross-reference
interchangeable
802-005Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 80C06-5-1AA?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 80C06-5-1AA?
80C06-5-1AA is a FASTENER ASSEMBLY,TURNLOCK.
What parts can replace 80C06-5-1AA?
There are 25 known substitutes for 80C06-5-1AA: 80S01-5-1AA, MS17731-5, MIL-F-22978 and 22 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 80C06-5-1AA?
80C06-5-1AA is cataloged in the Federal Logistics Information System (FLIS) under NSN 5325-00-284-2146. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 80C06-5-1AA

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026