PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 80A1032-8D
80A1032-8D ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.340 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN, thread_length: 0.384 INCHES MINIMUM IN, screw_material: COPPER ALLOY, fastener_length: 0.500 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-010-1180, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
80A1032-8D
NSN: 5305-00-010-1180
FSC: 5305
CAGE: 52983 — HEWLETT-PACKARD CO WALTHAM DIV (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.340 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
thread_length0.384 INCHES MINIMUM IN
screw_materialCOPPER ALLOY
fastener_length0.500 INCHES NOMINAL IN
thread_directionRIGHT-HAND
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
internal_drive_styleSLOT
nominal_thread_diameter0.190 INCHES IN
thread_quantity_per_inch32
thread_series_designatorUNF
NSN5305-00-010-1180
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 80A1032-8D · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD LENGTH: 0.384 INCHES MINIMUM IN
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 2S STYLE
•
THREAD CLASS: 2A A
•
HEAD DIAMETER: 0.340 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
•
THREAD DIRECTION: RIGHT-HAND
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD QUANTITY PER INCH: 32
•
INTERNAL DRIVE STYLE: SLOT
TECHNICAL CHARACTERISTICS (FLIS)
THREAD LENGTH0.384 INCHES MINIMUM IN
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 2S STYLE
THREAD CLASS2A A
HEAD DIAMETER0.340 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
HEAD STYLEFLAT COUNTERSUNK
THREAD QUANTITY PER INCH32
INTERNAL DRIVE STYLESLOT
SCREW MATERIALCOPPER ALLOY
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
101-180Interchangeable
interchangeable cross-reference
interchangeable
A144Interchangeable
interchangeable cross-reference
interchangeable
601397Interchangeable
interchangeable cross-reference
interchangeable
C402-4Interchangeable
interchangeable cross-reference
interchangeable
5950PL0863553Interchangeable
interchangeable cross-reference
interchangeable
KW1090-25-7PLInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 80A1032-8D?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 80A1032-8D?
80A1032-8D is a SCREW,MACHINE.
What parts can replace 80A1032-8D?
There are 10 known substitutes for 80A1032-8D: 101-180, A144, 601397 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 80A1032-8D?
80A1032-8D is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-010-1180. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 80A1032-8D

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026