PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 809948-00
809948-00 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.199 INCHES NOMINAL IN, material: ALUMINUM ALLOY BAND, loop_width: 0.688 INCHES NOMINAL IN, loop_length: 1.125 INCHES NOMINAL IN, overall_width: 0.500 INCHES NOMINAL IN, style_designator: MULTIPLE LOOP. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-282-9297, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
809948-00
NSN: 5340-00-282-9297
FSC: 5340
CAGE: 32345 — DEFENSE REDUCTION AGENCY (USA)
SPECIFICATIONS
diameter0.199 INCHES NOMINAL IN
materialALUMINUM ALLOY BAND
loop_width0.688 INCHES NOMINAL IN
loop_length1.125 INCHES NOMINAL IN
overall_width0.500 INCHES NOMINAL IN
style_designatorMULTIPLE LOOP
tongue_hole_typeROUND, UNTHREADED
surface_treatmentANODIZE BAND
material_thickness0.040 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end1.250 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole1.000 INCHES NOMINAL IN
NSN5340-00-282-9297
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 809948-00 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 1.000 INCHES NOMINAL IN
•
SURFACE TREATMENT: ANODIZE BAND
•
MATERIAL: ALUMINUM ALLOY BAND
•
MATERIAL THICKNESS: 0.040 INCHES NOMINAL IN
•
STYLE DESIGNATOR: MULTIPLE LOOP
•
LOOP LENGTH: 1.125 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.000 INCHES NOMINAL IN
SURFACE TREATMENTANODIZE BAND
MATERIALALUMINUM ALLOY BAND
MATERIAL THICKNESS0.040 INCHES NOMINAL IN
STYLE DESIGNATORMULTIPLE LOOP
MATERIALRUBBER CUSHION
LOOP LENGTH1.125 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.250 INCHES NOMINAL IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
DIAMETER0.199 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
HS51156K1110Upgraded Successor
successor cross-reference
successor
5982Upgraded Successor
successor cross-reference
successor
60044Interchangeable
interchangeable cross-reference
interchangeable
10384007Interchangeable
interchangeable cross-reference
interchangeable
5297052Interchangeable
interchangeable cross-reference
interchangeable
CA0111Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 809948-00?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 809948-00?
809948-00 is a CLAMP,LOOP.
What parts can replace 809948-00?
There are 6 known substitutes for 809948-00: HS51156K1110, 5982, 60044 and 3 more. Substitute compatibility should be verified for your specific system.
Is 809948-00 still available?
809948-00 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 809948-00

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026