PartsTable
Technical Data Sheet
Download PDF

8092-599-P5 — SEAL,PLAIN

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

8092-599-P5: SEAL,PLAIN.

The SEAL,PLAIN is a the manufacturer industrial component. Key specifications include material: PLASTIC PHENOLIC BACKING, seal_width: 0.272 INCHES NOMINAL IN, construction: SOLID, housing_bore_diameter: 3.877 INCHES NOMINAL IN, accommodated_shaft_diameter: 3.500 INCHES NOMINAL IN, cross-sectional_shape_style: SINGLE LIP. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-818-0523, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8092-599-P5
NSN: 5330-00-818-0523
FSC: 5330 — Packing and Gasket Materials
CAGE: T0813 — MAKINE VE KIMYA ENDUSTRISI ANONIM SIRKETI AGIR SILAH FABRIKASI SUBESI (TUR)
SPECIFICATIONS
materialPLASTIC PHENOLIC BACKING
seal_width0.272 INCHES NOMINAL IN
constructionSOLID
housing_bore_diameter3.877 INCHES NOMINAL IN
accommodated_shaft_diameter3.500 INCHES NOMINAL IN
cross-sectional_shape_styleSINGLE LIP
NSN5330-00-818-0523
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8092-599-P5 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.272 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 3.877 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SINGLE LIP
•
ACCOMMODATED SHAFT DIAMETER: 3.500 INCHES NOMINAL IN
•
MATERIAL: PLASTIC PHENOLIC BACKING
•
CONSTRUCTION: SOLID
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.272 INCHES NOMINAL IN
HOUSING BORE DIAMETER3.877 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESINGLE LIP
ACCOMMODATED SHAFT DIAMETER3.500 INCHES NOMINAL IN
MATERIALPLASTIC PHENOLIC BACKING
CONSTRUCTIONSOLID
SUBSTITUTES & CROSS-REFERENCES 6
8029-160-HRSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
5330008180523Reference document
Same NSN cross-reference
Reference document — Secondary reference
K.M109.7748763Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
8092Reference document
Same NSN cross-reference
Reference document — Secondary reference
7748763Reference document
Same NSN cross-reference
Reference document — Secondary reference
10471486Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 8092-599-P5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8092-599-P5?
8092-599-P5 is a SEAL,PLAIN.
What parts can replace 8092-599-P5?
There are 6 known substitutes for 8092-599-P5: 8029-160-HR, 5330008180523, K.M109.7748763 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 8092-599-P5?
8092-599-P5 is cataloged in the U.S. Government catalog under NSN 5330-00-818-0523. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8092-599-P5