8090042-2: SPACER,PLATE.
The SPACER,PLATE is a the manufacturer industrial component. Key specifications include material: PLASTIC PHENOLIC AND PAPER, hole_diameter: 0.151 INCHES MINIMUM AND 0.161 INCHES MAXIMUM IN, overall_width: 0.370 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN, overall_length: 5.190 INCHES MINIMUM AND 5.210 INCHES MAXIMUM IN, style_designator: NON-CIRCULAR W/SQUARE CORNERS, overall_thickness: 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN. This part is cataloged in the U.S.
Government catalog under NSN 5365-01-385-3466, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | PLASTIC PHENOLIC AND PAPER |
| hole_diameter | 0.151 INCHES MINIMUM AND 0.161 INCHES MAXIMUM IN |
| overall_width | 0.370 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN |
| overall_length | 5.190 INCHES MINIMUM AND 5.210 INCHES MAXIMUM IN |
| special_features | FOUR GROOVES PARALLEL TO LEFT END, 0.060 IN. DEEP, 0.270 IN. FROM END 0.590 IN. WIDE, 2.250 IN. FROM END 0.160 IN. WIDE, 4.050 IN. FROM END 0.150 IN. WIDE, AND 4.400 IN. FROM END 0.150 IN. WIDE IN |
| style_designator | NON-CIRCULAR W/SQUARE CORNERS |
| overall_thickness | 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN |
| bolt_hole_quantity | 2 |
| material_document_and_classification | MIL-P-3115, TYPE PBE MIL SPEC SINGLE MATERIAL RESPONSE |
| bolt_hole_centerline_to_nearest_edge_distance | 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN |
| outside_edge_to_bolt_hole_center_distance_along_length | 0.140 INCHES MINIMUM AND 0.160 INCHES MAXIMUM IN |
| center_to_center_distance_between_bolt_holes_along_length | 4.895 INCHES MINIMUM AND 4.905 INCHES MAXIMUM IN |
| NSN | 5365-01-385-3466 |
| OVERALL THICKNESS | 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN |
| STYLE DESIGNATOR | NON-CIRCULAR W/SQUARE CORNERS |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-P-3115, TYPE PBE MIL SPEC SINGLE MATERIAL RESPONSE |
| OVERALL LENGTH | 5.190 INCHES MINIMUM AND 5.210 INCHES MAXIMUM IN |
| OVERALL WIDTH | 0.370 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN |
| BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN |
| BOLT HOLE QUANTITY | 2 |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 4.895 INCHES MINIMUM AND 4.905 INCHES MAXIMUM IN |
| SPECIAL FEATURES | FOUR GROOVES PARALLEL TO LEFT END, 0.060 IN. DEEP, 0.270 IN. FROM END 0.590 IN. WIDE, 2.250 IN. FROM END 0.160 IN. WIDE, 4.050 IN. FROM END 0.150 IN. WIDE, AND 4.400 IN. FROM END 0.150 IN. WIDE IN |
| OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.140 INCHES MINIMUM AND 0.160 INCHES MAXIMUM IN |
No substitute or cross-reference records for this part.