PartsTable
Technical Data Sheet
Download PDF

809-083-14G6-SK — CAP-PLUG,PROTECTIVE,DUST AND MOI

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

809-083-14G6-SK: CAP-PLUG,PROTECTIVE,DUST AND MOI.

CAP-PLUG,PROTECTIVE,DUST AND MOI. Key specifications include material: RUBBER, special_features: PLUG COVER LENGTH IS 0.94" AND ATTACHMENT LENGTH IS 6.0", end_item_identification: 5895-01-692-0088, open_end_inside_diameter: 0.78 INCHES NOMINAL IN, part_name_assigned_by_controlling_agency: PUSH-PULL PLUG COVER. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-696-9461, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
809-083-14G6-SK
NSN: 5340-01-696-9461
FSC: 5340 — Hardware, Commercial
CAGE: 06324 — GLENAIR, INC. (USA)
SPECIFICATIONS
materialRUBBER
special_featuresPLUG COVER LENGTH IS 0.94" AND ATTACHMENT LENGTH IS 6.0"
end_item_identification5895-01-692-0088
open_end_inside_diameter0.78 INCHES NOMINAL IN
part_name_assigned_by_controlling_agencyPUSH-PULL PLUG COVER
NSN5340-01-696-9461
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 809-083-14G6-SK MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OPEN END INSIDE DIAMETER: 0.78 INCHES NOMINAL IN
•
MATERIAL: RUBBER
TECHNICAL CHARACTERISTICS
SPECIAL FEATURESPLUG COVER LENGTH IS 0.94" AND ATTACHMENT LENGTH IS 6.0"
OPEN END INSIDE DIAMETER0.78 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYPUSH-PULL PLUG COVER
END ITEM IDENTIFICATION5895-01-692-0088
MATERIALRUBBER
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 809-083-14G6-SK?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 809-083-14G6-SK?
809-083-14G6-SK is a CAP-PLUG,PROTECTIVE,DUST AND MOI.
What is the NSN for 809-083-14G6-SK?
809-083-14G6-SK is cataloged in the U.S. Government catalog under NSN 5340-01-696-9461. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 809-083-14G6-SK

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.