PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 808961
808961 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The DAMPENER,FLUTTER is a the manufacturer industrial component. Key specifications include special_features: 1500 PSIG OPERATING PRESSURE,MINUS 45.6 TO 71.1 DEG C TEMP RANGE,0.996 IN. STROKE,5.334 IN.

EXTENDED LG;ACFT HYD IN. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-253-2610, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
808961
NSN: 5310-00-253-2610
FSC: 5310
CAGE: 34623 — AM GENERAL LLC (USA)
SPECIFICATIONS
special_features1500 PSIG OPERATING PRESSURE,MINUS 45.6 TO 71.1 DEG C TEMP RANGE,0.996 IN. STROKE,5.334 IN. EXTENDED LG;ACFT HYD IN
NSN5310-00-253-2610
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 808961 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 1.060 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 1010 OVERALL
•
THICKNESS: 0.250 INCHES NOMINAL IN
•
PERIPHERAL SHAPE STYLE: ROUND
•
SURFACE TREATMENT: ZINC OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
•
HOLE DIAMETER: 0.530 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL DIAMETER1.060 INCHES NOMINAL IN
MATERIALSTEEL COMP 1010 OVERALL
THICKNESS0.250 INCHES NOMINAL IN
PERIPHERAL SHAPE STYLEROUND
SURFACE TREATMENTZINC OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.530 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
60010-1Interchangeable
interchangeable cross-reference
interchangeable
8-08961Interchangeable
interchangeable cross-reference
interchangeable
60010-3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 808961?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 808961?
808961 is a DAMPENER,FLUTTER.
What parts can replace 808961?
There are 3 known substitutes for 808961: 60010-1, 8-08961, 60010-3. Substitute compatibility should be verified for your specific system.
What is the NSN for 808961?
808961 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-253-2610. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 808961

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026