PartsTable
Technical Data Sheet
Download PDF

808725-0-01 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

808725-0-01: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4140 OR STEEL COMP 4340 OVERALL, nut_style: HEXAGON, nut_height: 2.000 INCHES NOMINAL IN, thread_class: 3B, thread_series: UN, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-382-4097, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
808725-0-01
NSN: 5310-01-382-4097
FSC: 5310 — Nuts and Washers
CAGE: 96169 — ELECTRIC BOAT CORPORATION DIV GENERAL DYNAMICS ELECTRIC BOAT (USA)
SPECIFICATIONS
materialSTEEL COMP 4140 OR STEEL COMP 4340 OVERALL
nut_styleHEXAGON
nut_height2.000 INCHES NOMINAL IN
thread_class3B
thread_seriesUN
thread_directionRIGHT-HAND
width_across_flats5.360 INCHES MINIMUM AND 5.375 INCHES MAXIMUM IN
nominal_thread_size3.875 INCHES IN
bearing_surface_typeFLAT
thread_quantity_per_inch16
NSN5310-01-382-4097
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 808725-0-01 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 5.360 INCHES MINIMUM AND 5.375 INCHES MAXIMUM IN
•
THREAD SERIES: UN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 3.875 INCHES IN
•
NUT HEIGHT: 2.000 INCHES NOMINAL IN
•
NUT STYLE: HEXAGON
•
THREAD CLASS: 3B
•
THREAD QUANTITY PER INCH: 16
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS5.360 INCHES MINIMUM AND 5.375 INCHES MAXIMUM IN
THREAD SERIESUN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE3.875 INCHES IN
NUT HEIGHT2.000 INCHES NOMINAL IN
NUT STYLEHEXAGON
THREAD CLASS3B
THREAD QUANTITY PER INCH16
MATERIALSTEEL COMP 4140 OR STEEL COMP 4340 OVERALL
BEARING SURFACE TYPEFLAT
SUBSTITUTES & CROSS-REFERENCES 2
36810-2ITEM68Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
808725-0Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 808725-0-01?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 808725-0-01?
808725-0-01 is a NUT,PLAIN,HEXAGON.
What parts can replace 808725-0-01?
There are 2 known substitutes for 808725-0-01: 36810-2ITEM68, 808725-0. Substitute compatibility should be verified for your specific system.
What is the NSN for 808725-0-01?
808725-0-01 is cataloged in the U.S. Government catalog under NSN 5310-01-382-4097. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 808725-0-01

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.