PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 8086SHG23
8086SHG23 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: RUBBER SYNTHETIC CUSHION, overall_width: 0.500 INCHES NOMINAL IN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: PASSIVATE BAND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-411-0661, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8086SHG23
NSN: 5340-00-411-0661
FSC: 5340
CAGE: 72285 — EXACTO INDUSTRIES INC (USA)
SPECIFICATIONS
diameter0.204 INCHES NOMINAL IN
materialRUBBER SYNTHETIC CUSHION
overall_width0.500 INCHES NOMINAL IN
style_designatorOFFSET MOUNT
tongue_hole_typeROUND, UNTHREADED
surface_treatmentPASSIVATE BAND
material_thickness0.032 INCHES NOMINAL IN
loop_inside_diameter1.438 INCHES NOMINAL IN
cushioning_environmental_protectionWEATHER RESISTANT
material_document_and_classificationMIL-S-6721 MIL SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end1.404 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole1.186 INCHES NOMINAL IN
NSN5340-00-411-0661
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8086SHG23 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.404 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC CUSHION
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6721 MIL SPEC SINGLE MATERIAL RESPONSE BAND
•
STYLE DESIGNATOR: OFFSET MOUNT
•
CUSHIONING ENVIRONMENTAL PROTECTION: WEATHER RESISTANT
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 1.186 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 1.438 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
DISTANCE FROM LOOP CENTER TO TONGUE END1.404 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC CUSHION
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6721 MIL SPEC SINGLE MATERIAL RESPONSE BAND
STYLE DESIGNATOROFFSET MOUNT
CUSHIONING ENVIRONMENTAL PROTECTIONWEATHER RESISTANT
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.186 INCHES NOMINAL IN
LOOP INSIDE DIAMETER1.438 INCHES NOMINAL IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
MATERIALSTEEL CORROSION RESISTING BAND
SURFACE TREATMENTPASSIVATE BAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
41S35Interchangeable
interchangeable cross-reference
interchangeable
8330311Interchangeable
interchangeable cross-reference
interchangeable
361223Interchangeable
interchangeable cross-reference
interchangeable
S975-2-23Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 8086SHG23?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8086SHG23?
8086SHG23 is a CLAMP,LOOP.
What parts can replace 8086SHG23?
There are 4 known substitutes for 8086SHG23: 41S35, 8330311, 361223 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 8086SHG23?
8086SHG23 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-411-0661. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8086SHG23

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026