PartsTable
Technical Data Sheet
Download PDF

808332 — BELL CRANK

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

808332: BELL CRANK.

The BELL CRANK is a the manufacturer industrial component. Key specifications include material: STEEL, bore_length: 0.680 INCHES NOMINAL IN, bore_diameter: 0.320 INCHES NOMINAL IN, special_features: CASE HARDENED; 90 DEG BEND ANGLE, style_designator: FLAT, RAISED FACE PIVOT HOLE, ONE OR MORE HOLES BOTH ARMS, end_hole/ball_diameter: 0.316 INCHES NOMINAL FIRST END IN. This part is cataloged in the U.S.

Government catalog under NSN 3040-00-040-2610, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
808332
NSN: 3040-00-040-2610
FSC: 3040 — Miscellaneous Power Transmission Equipment
CAGE: 65909 — JEEP CORP (USA)
SPECIFICATIONS
materialSTEEL
bore_length0.680 INCHES NOMINAL IN
bore_diameter0.320 INCHES NOMINAL IN
special_featuresCASE HARDENED; 90 DEG BEND ANGLE
style_designatorFLAT, RAISED FACE PIVOT HOLE, ONE OR MORE HOLES BOTH ARMS
end_hole/ball_diameter0.316 INCHES NOMINAL FIRST END IN
center_to_center_distance_between_fulcrum_and_arm_end_hole/slot/ball1.780 INCHES NOMINAL SECOND END IN
NSN3040-00-040-2610
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available BELL CRANK TITLE COMPONENT PN 808332 MFR BELL CRANK
KEY FEATURES
•
CENTER TO CENTER DISTANCE BETWEEN FULCRUM AND ARM END HOLE/SLOT/BALL: 1.500 INCHES NOMINAL FIRST END IN
•
END HOLE/BALL DIAMETER: 0.125 INCHES NOMINAL SECOND END IN
•
BORE LENGTH: 0.680 INCHES NOMINAL IN
•
STYLE DESIGNATOR: FLAT, RAISED FACE PIVOT HOLE, ONE OR MORE HOLES BOTH ARMS
•
BORE DIAMETER: 0.320 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CENTER TO CENTER DISTANCE BETWEEN FULCRUM AND ARM END HOLE/SLOT/BALL1.500 INCHES NOMINAL FIRST END IN
CENTER TO CENTER DISTANCE BETWEEN FULCRUM AND ARM END HOLE/SLOT/BALL1.780 INCHES NOMINAL SECOND END IN
END HOLE/BALL DIAMETER0.125 INCHES NOMINAL SECOND END IN
END HOLE/BALL DIAMETER0.316 INCHES NOMINAL FIRST END IN
BORE LENGTH0.680 INCHES NOMINAL IN
STYLE DESIGNATORFLAT, RAISED FACE PIVOT HOLE, ONE OR MORE HOLES BOTH ARMS
SPECIAL FEATURESCASE HARDENED; 90 DEG BEND ANGLE
BORE DIAMETER0.320 INCHES NOMINAL IN
MATERIALSTEEL
SUBSTITUTES & CROSS-REFERENCES 3
8330947Reference document
Same NSN cross-reference
Reference document — Secondary reference
808333Reference document
Same NSN cross-reference
Reference document — Secondary reference
805631Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 808332?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 808332?
808332 is a BELL CRANK.
What parts can replace 808332?
There are 3 known substitutes for 808332: 8330947, 808333, 805631. Substitute compatibility should be verified for your specific system.
What is the NSN for 808332?
808332 is cataloged in the U.S. Government catalog under NSN 3040-00-040-2610. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 808332

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.