PartsTable
Technical Data Sheet
PartsTable / MRO / 808149
808149 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel
Confirm exact part number — similar PNs may be different parts
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,PRE. Key specifications include material: STEEL CORROSION RESISTING OVERALL, nut_style: CLINCH, body_style: CYLINDRICAL SERVO MOUNTED, nut_height: 0.096 INCHES MINIMUM AND 0.131 INCHES MAXIMUM IN, body_length: 1.586 INCHES NOMINAL IN, shaft_style: ROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5905-00-082-1479, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 808149
NSN: 5905-00-082-1479
FSC: 5905
CAGE: 06141 — L3 AVIATION PRODUCTS, INC. DBA L3 TECHNOLOGIES (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
nut_styleCLINCH
body_styleCYLINDRICAL SERVO MOUNTED
nut_height0.096 INCHES MINIMUM AND 0.131 INCHES MAXIMUM IN
body_length1.586 INCHES NOMINAL IN
shaft_styleROUND
bearing_typeBALL SHAFT
nut_diameter0.266 INCHES MINIMUM AND 0.296 INCHES MAXIMUM IN
pilot_length0.049 INCHES MINIMUM AND 0.054 INCHES MAXIMUM IN
shaft_length0.563 INCHES NOMINAL IN
shaft_runout0.001 INCHES IN
thread_class2B
NSN5905-00-082-1479
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RESISTOR,VARIABLE,WIRE WOUND,PRE TITLE COMPONENT PN 808149 MFR RESISTOR,VARIABLE,WIRE
KEY FEATURES
•
PILOT DIAMETER: 1.8750 INCHES NOMINAL IN
•
UNDERCUT WIDTH: 0.0730 INCHES MINIMUM IN
•
BODY STYLE: CYLINDRICAL SERVO MOUNTED
•
PILOT LENGTH: 0.0620 INCHES NOMINAL IN
•
OVERALL DIAMETER: 2.250 INCHES MAXIMUM IN
•
BODY DIAMETER: 2.000 INCHES NOMINAL IN
•
ACTUATOR TYPE: SINGLE SHAFT
•
SHAFT RUNOUT: 0.001 INCHES IN
TECHNICAL CHARACTERISTICS (FLIS)
PILOT DIAMETER1.8750 INCHES NOMINAL IN
UNDERCUT WIDTH0.0730 INCHES MINIMUM IN
BODY STYLECYLINDRICAL SERVO MOUNTED
PILOT LENGTH0.0620 INCHES NOMINAL IN
OVERALL DIAMETER2.250 INCHES MAXIMUM IN
BODY DIAMETER2.000 INCHES NOMINAL IN
ACTUATOR TYPESINGLE SHAFT
SHAFT RUNOUT0.001 INCHES IN
UNDERCUT DIAMETER1.875 INCHES NOMINAL IN
SHAFT END PLAY0.005 INCHES IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
PEMCLS632-2Interchangeable
interchangeable cross-reference
interchangeable
10001-8Interchangeable
interchangeable cross-reference
interchangeable
322621-27Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 808149?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 808149?
808149 is a RESISTOR,VARIABLE,WIRE WOUND,PRE. It is classified as a MRO (MRO_GENERAL).
What parts can replace 808149?
There are 3 known substitutes for 808149: PEMCLS632-2, 10001-8, 322621-27. Substitute compatibility should be verified for your specific system.
What is the NSN for 808149?
808149 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5905-00-082-1479. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 808149

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026