PartsTable
Technical Data Sheet
Download PDF

808-1500-20 — GASKET,SPIRAL WOUND

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

808-1500-20: GASKET,SPIRAL WOUND.

The GASKET,SPIRAL WOUND is a the manufacturer industrial component. Key specifications include outside_diameter: 2.375 INCHES NOMINAL IN, special_features: CONTAINS NON-ASBESTOS MATERIAL, style_designator: CIRCULAR, aperture_diameter: 2.000 INCHES NOMINAL IN, cross-sectional_thickness: 0.125 INCHES NOMINAL IN, cross-sectional_shape_style: METAL WINDING W/ SOFT FILLER. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-388-2449, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
808-1500-20
NSN: 5330-01-388-2449
FSC: 5330 — Packing and Gasket Materials
CAGE: 1GZ83 — SFC VALVE CORPORATION (USA)
SPECIFICATIONS
outside_diameter2.375 INCHES NOMINAL IN
special_featuresCONTAINS NON-ASBESTOS MATERIAL
style_designatorCIRCULAR
aperture_diameter2.000 INCHES NOMINAL IN
cross-sectional_thickness0.125 INCHES NOMINAL IN
cross-sectional_shape_styleMETAL WINDING W/ SOFT FILLER
environmental_attribute_codeASBESTOS ALTERNATIVE PRODUCTS
NSN5330-01-388-2449
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 808-1500-20 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.125 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CIRCULAR
•
CROSS-SECTIONAL SHAPE STYLE: METAL WINDING W/ SOFT FILLER
•
OUTSIDE DIAMETER: 2.375 INCHES NOMINAL IN
•
APERTURE DIAMETER: 2.000 INCHES NOMINAL IN
•
ENVIRONMENTAL ATTRIBUTE CODE: ASBESTOS ALTERNATIVE PRODUCTS
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.125 INCHES NOMINAL IN
STYLE DESIGNATORCIRCULAR
CROSS-SECTIONAL SHAPE STYLEMETAL WINDING W/ SOFT FILLER
OUTSIDE DIAMETER2.375 INCHES NOMINAL IN
APERTURE DIAMETER2.000 INCHES NOMINAL IN
SPECIAL FEATURESCONTAINS NON-ASBESTOS MATERIAL
ENVIRONMENTAL ATTRIBUTE CODEASBESTOS ALTERNATIVE PRODUCTS
SUBSTITUTES & CROSS-REFERENCES 4
808-20Reference document
Same NSN cross-reference
Reference document — Secondary reference
808-1500T20Reference document
Same NSN cross-reference
Reference document — Secondary reference
807-150-121 PIEReference document
Same NSN cross-reference
Reference document — Secondary reference
808-1500T-20 NON-ASBESTOSReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 808-1500-20?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 808-1500-20?
808-1500-20 is a GASKET,SPIRAL WOUND.
What parts can replace 808-1500-20?
There are 4 known substitutes for 808-1500-20: 808-20, 808-1500T20, 807-150-121 PIE and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 808-1500-20?
808-1500-20 is cataloged in the U.S. Government catalog under NSN 5330-01-388-2449. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 808-1500-20

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.