PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 807P
807P ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 40.00 MILLIMETERS NOMINAL MM, contact_angle: 25.0 DEGREES MINIMUM, overall_width: 18.0 MILLIMETERS NOMINAL MM, load_direction: ANGULAR. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-8045, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
807P
NSN: 3110-00-156-8045
FSC: 3110
CAGE: 93232 — CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION DBA CURTISS WRIGHT ENGINEERED PUMP DIVISION USE CAGE CODE 0UBG9 FOR CATALOGING (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter40.00 MILLIMETERS NOMINAL MM
contact_angle25.0 DEGREES MINIMUM
overall_width18.0 MILLIMETERS NOMINAL MM
load_directionANGULAR
surface_finishGROUND
style_designatorCOUNTERBORED OUTER RING, NON-SEPARABLE
lubrication_materialGREASE
overall_outside_diameter80.00 MILLIMETERS NOMINAL MM
nondefinitive_spec/std_data134 TYPE AND 00 GRADE
retainer_fabrication_methodMACHINED
NSN3110-00-156-8045
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 807P · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOAD DIRECTION: ANGULAR
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: COUNTERBORED OUTER RING, NON-SEPARABLE
•
RETAINER FABRICATION METHOD: MACHINED
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
SURFACE FINISH: GROUND
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-18709 MIL SPEC SINGLE MATERIAL RESPONSE
•
BORE SHAPE: STRAIGHT
TECHNICAL CHARACTERISTICS (FLIS)
LOAD DIRECTIONANGULAR
MATERIALSTEEL OVERALL
STYLE DESIGNATORCOUNTERBORED OUTER RING, NON-SEPARABLE
RETAINER FABRICATION METHODMACHINED
STANDARD TOLERANCE DESIGNATIONABEC NO.1
SURFACE FINISHGROUND
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-18709 MIL SPEC SINGLE MATERIAL RESPONSE
BORE SHAPESTRAIGHT
LOAD DIRECTIONANGULAR
CONTACT ANGLE25.0 DEGREES MINIMUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 28
7208Interchangeable
interchangeable cross-reference
interchangeable
1M7911Interchangeable
interchangeable cross-reference
interchangeable
36AInterchangeable
interchangeable cross-reference
interchangeable
111129Interchangeable
interchangeable cross-reference
interchangeable
7508Interchangeable
interchangeable cross-reference
interchangeable
6208ZInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 807P?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 807P?
807P is a BEARING,BALL,ANNULAR.
What parts can replace 807P?
There are 28 known substitutes for 807P: 7208, 1M7911, 36A and 25 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 807P?
807P is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-8045. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 807P

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026