PartsTable
Technical Data Sheet
Download PDF

807801 — PACKING,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

807801: PACKING,PREFORMED.

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include width: 0.810 INCHES NOMINAL IN, length: 1.500 INCHES NOMINAL IN, material: ALUMINUM ALLOY 2024, overall_depth: 0.890 INCHES NOMINAL IN, pointer_design: NONDETACHABLE, inside_diameter: 0.255 INCHES MINIMUM AND 0.257 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-318-4332, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
807801
NSN: 5330-00-318-4332
NIINs: 003184332, 010553933
FSC: 5330 — Packing and Gasket Materials
CAGE: 34623 — AM GENERAL LLC (USA)
SPECIFICATIONS
width0.810 INCHES NOMINAL IN
length1.500 INCHES NOMINAL IN
materialALUMINUM ALLOY 2024
overall_depth0.890 INCHES NOMINAL IN
pointer_designNONDETACHABLE
inside_diameter0.255 INCHES MINIMUM AND 0.257 INCHES MAXIMUM IN
screw_drive_typeCROSS RECESS TYPE 1
special_featuresON SIDE OPPOSITE TO 0.138-32 HOLE THERE IS 0.165 IN. MIN DIA,0.171 IN. MAX DIA,WITH COUNTERBORE 0.310 IN. DIA,0.250 IN. DEEP IN
style_designatorBAR WITH SINGLE POINTER
attachment_methodMACHINE SCREW
counterbore_depth0.450 INCHES NOMINAL IN
overall_thickness0.880 INCHES NOMINAL IN
NSN5330-00-318-4332
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 807801 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.240 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
•
HARDNESS RATING: 75.0 SHORE DUROMETER A MINIMUM AND 90.0 SHORE DUROMETER A MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: 417,CL SB,GR815C2E3F1J MIL STD SINGLE MATERIAL RESPONSE OVERALL
•
CENTER HOLE DIAMETER: 0.670 INCHES MINIMUM AND 0.680 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.240 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
HARDNESS RATING75.0 SHORE DUROMETER A MINIMUM AND 90.0 SHORE DUROMETER A MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION417,CL SB,GR815C2E3F1J MIL STD SINGLE MATERIAL RESPONSE OVERALL
CENTER HOLE DIAMETER0.670 INCHES MINIMUM AND 0.680 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
8328495Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 807801?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 807801?
807801 is a PACKING,PREFORMED.
What parts can replace 807801?
There is 1 known substitute for 807801: 8328495. Substitute compatibility should be verified for your specific system.
What is the NSN for 807801?
807801 is cataloged in the U.S. Government catalog under NSN 5330-00-318-4332. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 807801