PartsTable
Technical Data Sheet
Download PDF

8075-A-0440 — STANDOFF,THREADED,SPACING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

8075-A-0440: STANDOFF,THREADED,SPACING.

The STANDOFF,THREADED,SPACING is a the manufacturer industrial component. Key specifications include diameter: 0.188 INCHES NOMINAL IN, material: ALUMINUM ALLOY OVERALL, thread_class: 2B RIGHT INTERNAL, thread_direction: RIGHT-HAND RIGHT INTERNAL, nominal_thread_size: 0.188 INCHES RIGHT INTERNAL IN, cross-sectional_shape: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-471-4023, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8075-A-0440
NSN: 5340-01-471-4023
FSC: 5340 — Hardware, Commercial
CAGE: 1YGB8 — CAREY MANUFACTURING CO, INC DBA AMATOM ELECTRONIC HARDWARE DIV AMATOM ELECTRONIC HARDWARE (USA)
SPECIFICATIONS
diameter0.188 INCHES NOMINAL IN
materialALUMINUM ALLOY OVERALL
thread_class2B RIGHT INTERNAL
thread_directionRIGHT-HAND RIGHT INTERNAL
nominal_thread_size0.188 INCHES RIGHT INTERNAL IN
cross-sectional_shapeROUND
cross-sectional_width0.188 INCHES NOMINAL IN
cross-sectional_length0.125 INCHES NOMINAL IN
thread_pitch_diameters+0.0958 TO 0.0991 INCHES RIGHT INTERNAL IN
thread_quantity_per_inch40 RIGHT INTERNAL
thread_series_designatorUNIFIED NATIONAL COARSE (UNC) RIGHT INTERNAL
NSN5340-01-471-4023
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8075-A-0440 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL WIDTH: 0.188 INCHES NOMINAL IN
•
THREAD PITCH DIAMETERS: +0.0958 TO 0.0991 INCHES RIGHT INTERNAL IN
•
DIAMETER: 0.188 INCHES NOMINAL IN
•
CROSS-SECTIONAL LENGTH: 0.125 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND RIGHT INTERNAL
•
NOMINAL THREAD SIZE: 0.188 INCHES RIGHT INTERNAL IN
•
CROSS-SECTIONAL SHAPE: ROUND
•
THREAD CLASS: 2B RIGHT INTERNAL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL WIDTH0.188 INCHES NOMINAL IN
THREAD PITCH DIAMETERS+0.0958 TO 0.0991 INCHES RIGHT INTERNAL IN
DIAMETER0.188 INCHES NOMINAL IN
CROSS-SECTIONAL LENGTH0.125 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND RIGHT INTERNAL
NOMINAL THREAD SIZE0.188 INCHES RIGHT INTERNAL IN
CROSS-SECTIONAL SHAPEROUND
THREAD CLASS2B RIGHT INTERNAL
THREAD QUANTITY PER INCH40 RIGHT INTERNAL
MATERIALALUMINUM ALLOY OVERALL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 8075-A-0440?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8075-A-0440?
8075-A-0440 is a STANDOFF,THREADED,SPACING.
What is the NSN for 8075-A-0440?
8075-A-0440 is cataloged in the U.S. Government catalog under NSN 5340-01-471-4023. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8075-A-0440

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.