PartsTable
Technical Data Sheet
Download PDF

807354-B000 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

807354-B000: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 6.625 INCHES NOMINAL IN, overall_length: 10.750 INCHES NOMINAL IN, cross-sectional_thickness: 0.062 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-869-5667, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
807354-B000
NSN: 5330-00-869-5667
FSC: 5330 — Packing and Gasket Materials
CAGE: 0W570 — TUTHILL VACUUM SYSTEMS (USA)
SPECIFICATIONS
hole_diameter0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width6.625 INCHES NOMINAL IN
overall_length10.750 INCHES NOMINAL IN
cross-sectional_thickness0.062 INCHES NOMINAL IN
NSN5330-00-869-5667
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 807354-B000 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.062 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.062 INCHES NOMINAL IN
OVERALL LENGTH10.750 INCHES NOMINAL IN
OVERALL WIDTH6.625 INCHES NOMINAL IN
HOLE DIAMETER0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
SUBSTITUTES & CROSS-REFERENCES 1
11174-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 807354-B000?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 807354-B000?
807354-B000 is a GASKET.
What parts can replace 807354-B000?
There is 1 known substitute for 807354-B000: 11174-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 807354-B000?
807354-B000 is cataloged in the U.S. Government catalog under NSN 5330-00-869-5667. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 807354-B000