PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 807063-00
807063-00 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 0.2500 INCHES NOMINAL IN, alignment_type: RIGID, surface_finish: GROUND, inner_ring_width: 0.6250 INCHES NOMINAL IN, outer_ring_width: 0.5000 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-112-5616, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
807063-00
NSN: 3110-00-112-5616
FSC: 3110
CAGE: 32345 — DEFENSE REDUCTION AGENCY (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter0.2500 INCHES NOMINAL IN
alignment_typeRIGID
surface_finishGROUND
inner_ring_width0.6250 INCHES NOMINAL IN
outer_ring_width0.5000 INCHES NOMINAL IN
special_featuresEXTRA CAPACITY OUTER RACE,LOW TEMP GREASE
style_designatorNON-SEPARABLE, WITH RETAINER PLATES, DRAWN SHELL
surface_treatmentCADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
lubrication_materialGREASE
overall_outside_diameter0.6875 INCHES NOMINAL IN
standard_tolerance_designationAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
NSN3110-00-112-5616
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 807063-00 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NON-SEPARABLE, WITH RETAINER PLATES, DRAWN SHELL
•
ALIGNMENT TYPE: RIGID
•
INNER RING WIDTH: 0.6250 INCHES NOMINAL IN
•
OUTER RING WIDTH: 0.5000 INCHES NOMINAL IN
•
SURFACE FINISH: GROUND
•
MATERIAL: STEEL OVERALL
•
BORE DIAMETER: 0.2500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORNON-SEPARABLE, WITH RETAINER PLATES, DRAWN SHELL
ALIGNMENT TYPERIGID
INNER RING WIDTH0.6250 INCHES NOMINAL IN
OUTER RING WIDTH0.5000 INCHES NOMINAL IN
SURFACE FINISHGROUND
SPECIAL FEATURESEXTRA CAPACITY OUTER RACE,LOW TEMP GREASE
MATERIALSTEEL OVERALL
BORE DIAMETER0.2500 INCHES NOMINAL IN
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
AR4Interchangeable
interchangeable cross-reference
interchangeable
SF4-5JInterchangeable
interchangeable cross-reference
interchangeable
AR4ANG25Interchangeable
interchangeable cross-reference
interchangeable
J3AInterchangeable
interchangeable cross-reference
interchangeable
AR-4(J3A)Interchangeable
interchangeable cross-reference
interchangeable
MILL15098Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 807063-00?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 807063-00?
807063-00 is a BEARING,ROLLER,NEEDLE.
What parts can replace 807063-00?
There are 10 known substitutes for 807063-00: AR4, SF4-5J, AR4ANG25 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 807063-00?
807063-00 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-112-5616. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 807063-00

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026