Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The BEARING,SLEEVE is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, corner_shape: SQUARE INSIDE LEFT CORNER, flange_width: 0.0290 INCHES MINIMUM AND 0.0330 INCHES MAXIMUM IN, overall_length: 0.2290 INCHES MINIMUM AND 0.2390 INCHES MAXIMUM IN, style_designator: SOLID, EXTERNAL FLANGE ONE END, body_inside_diameter: 0.2520 INCHES MINIMUM AND 0.2530 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-679-7951, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
807051
NSN:5330-00-679-7951 FSC:5330 CAGE:80201 — SKF USA INC. DBA SKF AEROSPACE SEALING SOLUTIONS (USA)
SPECIFICATIONS
material
COPPER ALLOY OVERALL
corner_shape
SQUARE INSIDE LEFT CORNER
flange_width
0.0290 INCHES MINIMUM AND 0.0330 INCHES MAXIMUM IN
overall_length
0.2290 INCHES MINIMUM AND 0.2390 INCHES MAXIMUM IN
style_designator
SOLID, EXTERNAL FLANGE ONE END
body_inside_diameter
0.2520 INCHES MINIMUM AND 0.2530 INCHES MAXIMUM IN
body_outside_diameter
0.5003 INCHES MINIMUM AND 0.5006 INCHES MAXIMUM IN
flange_outside_diameter
0.5500 INCHES MINIMUM AND 0.5590 INCHES MAXIMUM IN
lubricant_accommodation_style
GROOVED CIRCULAR
surface_groove_location_and_quantity
1 INTERNAL
NSN
5330-00-679-7951
COMPONENT DIAGRAM
KEY FEATURES
•
SEAL WIDTH: 5.095 INCHES NOMINAL IN
•
MATERIAL: ZINC BACKING
•
TEST DATA DOCUMENT: 19207-8756299 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
•
CASE STYLE: SQUARE
•
SEALING ELEMENT STYLE: VERTICAL
•
ACCOMMODATED SHAFT DIAMETER: 3.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SEAL WIDTH
5.095 INCHES NOMINAL IN
MATERIAL
ZINC BACKING
MATERIAL
RUBBER AND CORK SEALING ELEMENT
TEST DATA DOCUMENT
19207-8756299 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 807051?
807051 is a BEARING,SLEEVE.
What parts can replace 807051?
There are 29 known substitutes for 807051: 4G94407-101A, 1000-038-00, V4G94407-101A and 26 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 807051?
807051 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-679-7951. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.