PartsTable
Technical Data Sheet
807-45 ✓ Verified by PartsTable
Hama · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

- For all applications where cables, lines, tubes, hoses, etc. require permanent fixing, bundling or fastening<br>- Industrial quality, for indoor and outdoor use<br>- Coloured, ideal for applications where optical accentuation is needed<br>- 50 pieces: 2.5 x 100 mm, nature, bundle ø 2-22 mm<br>- 50 pieces: 2.5 x 150 mm, nature, bundle ø 2-35 mm<br>- 50 pieces: 2.5 x 200 mm, nature, bundle ø 3-50 mm<br>- Single use closure, cannot be reopened<br>- Material: nylon 6.6<br>- Temperature range: -40 - 85Cº<br>- Colour: Nature<br>- Content: 150 Stck.<br>- Length: 1 cm<br>- Material: Nylon<br>- Max. Bundle Diameter: 1 cm<br>- Model: Cable Tie This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-6510, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
MRO MRO_GENERAL 807-45
NSN: 3110-00-155-6510
FSC: 3110
CAGE: 0EXU3 — AQUA-CHEM, INC. DBA AQUA-CHEM INC (USA)
SPECIFICATIONS
materialPLASTIC CASE
body_styleBUSHING MOUNT
body_width1.312 INCHES NOMINAL IN
body_height1.000 INCHES NOMINAL IN
body_length2.000 INCHES NOMINAL IN
body_diameter1.125 INCHES NOMINAL IN
terminal_typeWIRE LEAD
actuator_styleROUND
bushing_length0.406 INCHES NOMINAL IN
inclosure_typeFULLY INCLOSED
actuator_height0.656 INCHES NOMINAL IN
mounting_methodTHREADED BUSHING
NSN3110-00-155-6510
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 807-45 · Hama ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 36
U1207TMInterchangeable
interchangeable cross-reference
interchangeable
75-1228X258Interchangeable
interchangeable cross-reference
interchangeable
1228X258Interchangeable
interchangeable cross-reference
interchangeable
502257Interchangeable
interchangeable cross-reference
interchangeable
R120EInterchangeable
interchangeable cross-reference
interchangeable
NUL20Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 807-45?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 807-45?
807-45 is a RESISTOR,FIXED,WIRE WOUND manufactured by Hama. It is classified as a MRO (MRO_GENERAL).
What parts can replace 807-45?
There are 36 known substitutes for 807-45: U1207TM, 75-1228X258, 1228X258 and 33 more. Substitute compatibility should be verified for your specific system.
Is 807-45 still available?
807-45 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 807-45