PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 807-1700 PART 807-108
807-1700 PART 807-108 ✓ Verified by PartsTable
— · GATE VALVE
WHAT YOU NEED TO KNOW
Full open or full close only — never throttle Rising stem shows position visually
Throttling a gate valve erodes seats
PRODUCT OVERVIEW

The VALVE,ANGLE is a the manufacturer industrial component. Key specifications include material: COBALT ALLOY FLOW CONTROL DEVICE, valve_size: 0.500 INCHES IN, bonnet_type: OUTSIDE SCREW-YOKE, flange_shape: ROUND WITH HOLES ALL ENDS, connection_type: FLANGE ALL ENDS, style_designator: ANGLE FLANGED ENDS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4820-01-180-0832, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
807-1700 PART 807-108
NSN: 4820-01-180-0832
FSC: 4820
CAGE: 32373 — SFC VALVE CORP (USA)
SPECIFICATIONS
materialCOBALT ALLOY FLOW CONTROL DEVICE
valve_size0.500 INCHES IN
bonnet_typeOUTSIDE SCREW-YOKE
flange_shapeROUND WITH HOLES ALL ENDS
connection_typeFLANGE ALL ENDS
style_designatorANGLE FLANGED ENDS
nominal_thickness0.875 INCHES ALL ENDS IN
bolt_hole_quantity4 ALL ENDS
flange_face_designRAISED STRAIGHT ALL ENDS
operating_pressure1500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
flow_control_deviceDISK
maximum_operating_temp975.0 FAHRENHEIT SINGLE RESPONSE DEGF
NSN4820-01-180-0832
COMPONENT DIAGRAM
GATE VALVE — FULL OPEN OR FULL CLOSE ONLY Rising STEM BONNET FLOW → → FLOW SEATS — — SIZE: — · — · — PN: 807-1700 PART 807-108 · OEM ⚠ VERIFY BEFORE ORDERING Gate valves = FULL OPEN or FULL CLOSE only — never throttle. Partial opening causes seat erosion and vibration. ✓ BROKER TIP Rising stem shows valve position visually — easier maintenance. Non-rising stem saves headroom. PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
VALVE OPERATION METHOD: MANUAL
•
MATERIAL: COBALT ALLOY FLOW CONTROL DEVICE
•
FLOW CONTROL DEVICE: DISK
•
RAISED FACE NOMINAL HEIGHT: 0.250 INCHES ALL ENDS IN
•
BOLT HOLE QUANTITY: 4 ALL ENDS
•
NOMINAL THICKNESS: 0.875 INCHES ALL ENDS IN
•
VALVE SIZE: 0.500 INCHES IN
TECHNICAL CHARACTERISTICS (FLIS)
VALVE OPERATION METHODMANUAL
MATERIALCOBALT ALLOY FLOW CONTROL DEVICE
FLOW CONTROL DEVICEDISK
RAISED FACE NOMINAL HEIGHT0.250 INCHES ALL ENDS IN
MATERIALSTEEL CORROSION RESISTING STEM
BOLT HOLE QUANTITY4 ALL ENDS
NOMINAL THICKNESS0.875 INCHES ALL ENDS IN
VALVE SIZE0.500 INCHES IN
MAXIMUM OPERATING TEMP975.0 FAHRENHEIT SINGLE RESPONSE DEGF
OPERATING PRESSURE1500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
807108Interchangeable
interchangeable cross-reference
interchangeable
807-1700Interchangeable
interchangeable cross-reference
interchangeable
807-1700-26 3-4Interchangeable
interchangeable cross-reference
interchangeable
807-1700 PIECE 26 3-4INInterchangeable
interchangeable cross-reference
interchangeable
807-1700 PIECE 6 1/2 IN MONELInterchangeable
interchangeable cross-reference
interchangeable
807-1700-6-1/2IN MONELInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 807-1700 PART 807-108?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 807-1700 PART 807-108?
807-1700 PART 807-108 is a VALVE,ANGLE.
What parts can replace 807-1700 PART 807-108?
There are 20 known substitutes for 807-1700 PART 807-108: 807108, 807-1700, 807-1700-26 3-4 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 807-1700 PART 807-108?
807-1700 PART 807-108 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4820-01-180-0832. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 807-1700 PART 807-108

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026