PartsTable
Technical Data Sheet
Download PDF

806911 — RESISTOR,VARIABLE,NONWIRE WOUND,

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

806911: RESISTOR,VARIABLE,NONWIRE WOUND,.

RESISTOR,VARIABLE,NONWIRE WOUND,. Key specifications include material: RUBBER SYNTHETIC, body_style: RECTANGULAR, body_width: 0.240 INCHES NOMINAL IN, body_height: 0.375 INCHES NOMINAL IN, body_length: 0.375 INCHES NOMINAL IN, shaft_style: ROUND, SLOTTED. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-070-2003, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 806911
NSN: 5331-00-070-2003
NIINs: 000702003, 005768327
FSC: 5331 — O-ring
CAGE: 1JZ80 — BALCRANK PRODUCTS INC (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
body_styleRECTANGULAR
body_width0.240 INCHES NOMINAL IN
body_height0.375 INCHES NOMINAL IN
body_length0.375 INCHES NOMINAL IN
shaft_styleROUND, SLOTTED
shaft_length0.045 INCHES NOMINAL IN
actuator_typeSINGLE SHAFT
shaft_diameter0.070 INCHES NOMINAL IN
mounting_methodTERMINAL
terminal_length0.200 INCHES MINIMUM IN
section_quantity1
NSN5331-00-070-2003
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 806911 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.367 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.367 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC
SUBSTITUTES & CROSS-REFERENCES 1
32731-8Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 806911?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 806911?
806911 is a RESISTOR,VARIABLE,NONWIRE WOUND,. It is classified as a MRO (MRO_GENERAL).
What parts can replace 806911?
There is 1 known substitute for 806911: 32731-8. Substitute compatibility should be verified for your specific system.
What is the NSN for 806911?
806911 is cataloged in the U.S. Government catalog under NSN 5331-00-070-2003. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 806911

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.