PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 806746
806746 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The REACTOR is a the manufacturer industrial component. Key specifications include diameter: 0.406 INCHES NOMINAL IN, material: STEEL COMP 1010 BAND, body_width: 1.000 INCHES NOMINAL IN, body_height: 1.125 INCHES NOMINAL IN, body_length: 1.375 INCHES NOMINAL IN, overall_width: 1.000 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-281-6239, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
806746
NSN: 5340-00-281-6239
FSC: 5340
CAGE: 34623 — AM GENERAL LLC (USA)
SPECIFICATIONS
diameter0.406 INCHES NOMINAL IN
materialSTEEL COMP 1010 BAND
body_width1.000 INCHES NOMINAL IN
body_height1.125 INCHES NOMINAL IN
body_length1.375 INCHES NOMINAL IN
overall_width1.000 INCHES NOMINAL IN
rating_methodELECTRICAL AND WINDING TURNS SINGLE COMPONENT SINGLE WINDING
turn_quantity102 SINGLE COMPONENT SINGLE WINDING
inclosure_typeFULLY INCLOSED
inductance_typeFIXED
mounting_methodFLANGE AND UNTHREADED HOLE(S) SINGLE GROUP
frequency_rating47.0 HERTZ MINIMUM AND 63.0 HERTZ MAXIMUM SINGLE COMPONENT
NSN5340-00-281-6239
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 806746 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL COMP 1010 BAND
•
DIAMETER: 0.406 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
MATERIAL THICKNESS: 0.160 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.250 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SINGLE LOOP
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.810 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL COMP 1010 BAND
DIAMETER0.406 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
MATERIAL THICKNESS0.160 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.250 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE LOOP
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.810 INCHES NOMINAL IN
OVERALL WIDTH1.000 INCHES NOMINAL IN
LOOP INSIDE DIAMETER1.125 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
453XInterchangeable
interchangeable cross-reference
interchangeable
550426Interchangeable
interchangeable cross-reference
interchangeable
30068Interchangeable
interchangeable cross-reference
interchangeable
806746Interchangeable
interchangeable cross-reference
interchangeable
L-18-CP-5Interchangeable
interchangeable cross-reference
interchangeable
3Q1135C-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 806746?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 806746?
806746 is a REACTOR.
What parts can replace 806746?
There are 7 known substitutes for 806746: 453X, 550426, 30068 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 806746?
806746 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-281-6239. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 806746

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026