PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 80616-000
80616-000 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,SYNCHRO is a the manufacturer industrial component. Key specifications include width: 0.250 INCHES NOMINAL IN, height: 0.188 INCHES NOMINAL IN, length: 1.188 INCHES NOMINAL IN, material: STEEL, hole_diameter: 0.125 INCHES NOMINAL IN, furnished_items: LOCKNUT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-896-9598, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
80616-000
NSN: 5340-00-896-9598
FSC: 5340
CAGE: 28856 — TELEX COMMUNICATIONS INC SUB OF TELEX CORP (USA)
SPECIFICATIONS
width0.250 INCHES NOMINAL IN
height0.188 INCHES NOMINAL IN
length1.188 INCHES NOMINAL IN
materialSTEEL
hole_diameter0.125 INCHES NOMINAL IN
furnished_itemsLOCKNUT
NSN5340-00-896-9598
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 80616-000 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE DIAMETER: 0.125 INCHES NOMINAL IN
•
MATERIAL: STEEL
•
HEIGHT: 0.188 INCHES NOMINAL IN
•
WIDTH: 0.250 INCHES NOMINAL IN
•
FURNISHED ITEMS: LOCKNUT
•
LENGTH: 1.188 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
HOLE DIAMETER0.125 INCHES NOMINAL IN
MATERIALSTEEL
HEIGHT0.188 INCHES NOMINAL IN
WIDTH0.250 INCHES NOMINAL IN
FURNISHED ITEMSLOCKNUT
LENGTH1.188 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
7010AL25-064Interchangeable
interchangeable cross-reference
interchangeable
907379Interchangeable
interchangeable cross-reference
interchangeable
124682-6D10-064Interchangeable
interchangeable cross-reference
interchangeable
1118896Interchangeable
interchangeable cross-reference
interchangeable
4356170Interchangeable
interchangeable cross-reference
interchangeable
D616-C-260Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 80616-000?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 80616-000?
80616-000 is a CLAMP,SYNCHRO.
What parts can replace 80616-000?
There are 12 known substitutes for 80616-000: 7010AL25-064, 907379, 124682-6D10-064 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 80616-000?
80616-000 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-896-9598. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 80616-000

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026