PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 806012
806012 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

HEATING ELEMENT,ELECTRICAL,NONIM. Key specifications include width: 1.510 INCHES NOMINAL IN, body_style: STRIP ELEMENT, overall_length: 8.060 INCHES NOMINAL IN, mounting_method_style: SLOT OR HOLE TYPE MOUNTING FACILITY, mounting_facility_width: 0.312 INCHES NOMINAL IN, mounting_facility_length: 0.500 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-622-8687, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
806012
NSN: 5340-00-622-8687
FSC: 5340
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
width1.510 INCHES NOMINAL IN
body_styleSTRIP ELEMENT
overall_length8.060 INCHES NOMINAL IN
mounting_method_styleSLOT OR HOLE TYPE MOUNTING FACILITY
mounting_facility_width0.312 INCHES NOMINAL IN
mounting_facility_length0.500 INCHES NOMINAL IN
terminal_arrangement_styleOFFSET OR STAGGERED AT ONE END
maximum_wattage_rating_in_watts250.0 SINGLE VOLTAGE
voltage_in_volts_and_current_type120.0 AC SINGLE VOLTAGE
center_to_center_distance_between_mounting_facilities_parallel_to_width7.060 INCHES NOMINAL IN
NSN5340-00-622-8687
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 806012 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH: 0.880 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI/SAE,1070 TO 1080 FED STD SINGLE MATERIAL RESPONSE OVERALL
•
LENGTH: 0.390 INCHES NOMINAL IN
•
LOOP OPENING WIDTH: 0.340 INCHES NOMINAL IN
•
DISTANCE FROM LOOP TO MOUNTING TAB: 0.080 INCHES NOMINAL IN
•
SLOT WIDTH: 0.330 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.025 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
WIDTH0.880 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAISI/SAE,1070 TO 1080 FED STD SINGLE MATERIAL RESPONSE OVERALL
LENGTH0.390 INCHES NOMINAL IN
LOOP OPENING WIDTH0.340 INCHES NOMINAL IN
DISTANCE FROM LOOP TO MOUNTING TAB0.080 INCHES NOMINAL IN
SLOT WIDTH0.330 INCHES NOMINAL IN
MATERIAL THICKNESS0.025 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
LOOP/HOLDING DIMENSION0.390 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
13000-3Interchangeable
interchangeable cross-reference
interchangeable
9381SBInterchangeable
interchangeable cross-reference
interchangeable
HM20072BInterchangeable
interchangeable cross-reference
interchangeable
10877BInterchangeable
interchangeable cross-reference
interchangeable
8135Interchangeable
interchangeable cross-reference
interchangeable
806-012PVCInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 806012?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 806012?
806012 is a HEATING ELEMENT,ELECTRICAL,NONIM.
What parts can replace 806012?
There are 19 known substitutes for 806012: 13000-3, 9381SB, HM20072B and 16 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 806012?
806012 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-622-8687. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 806012

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026