PartsTable
Technical Data Sheet
80586 ✓ Verified by PartsTable
Hama · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

Here, the clue is in the name: fantastic hand feel and scratch-resistant all-round protection for your Samsung Galaxy S25 Ultra thanks to the special surface. And with the mobile phone case in cool blue, you are always up to date in terms of fashion.<br><br><b>Pleasant to the touch</b><br>A sophisticated hand flatterer: the silky rubber finish surface of the phone case looks and feels great<br><br><b>Anti-stick surface</b><br>Non-sticky: special rubber surface prevents crumbs from sticking to the phone case and allows the phone to be removed from trouser pockets, jacket pockets and handbags in one go<br><br><b>Edge protection for the display</b><br>Additional protection for the mobile phone display: The mobile phone case has a raised edge all around - so the touchscreen is better protected<br><br><b>Camera protection through raised edges</b><br>Lay it down carefree: the raised edges on the back of the phone case provide protection for the protruding camera lenses without affecting the This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-699-7006, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
80586
NSN: 5310-00-699-7006
FSC: 5310
CAGE: 55972 — HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS (USA)
SPECIFICATIONS
end_item_identificationLANDING GEAR COMPON
NSN5310-00-699-7006
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 80586 · Hama ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
NUT STYLE: SPLINE
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE OVERALL EXCEPT INSERT
NOMINAL THREAD SIZE: 0.250 INCHES IN
MATERIAL: PLASTIC POLYAMIDE NYLON LOCKING INSERT
SURFACE TREATMENT: CADMIUM OR ZINC NUT
PILOT DIAMETER: 0.384 INCHES MINIMUM AND 0.388 INCHES MAXIMUM IN
PILOT LENGTH: 0.250 INCHES NOMINAL IN
LOCKING FEATURE: PREVAILING TORQUE WITH NONMETALLIC INSERT
TECHNICAL CHARACTERISTICS (FLIS)
NUT STYLESPLINE
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE OVERALL EXCEPT INSERT
NOMINAL THREAD SIZE0.250 INCHES IN
MATERIALPLASTIC POLYAMIDE NYLON LOCKING INSERT
SURFACE TREATMENTCADMIUM OR ZINC NUT
PILOT DIAMETER0.384 INCHES MINIMUM AND 0.388 INCHES MAXIMUM IN
PILOT LENGTH0.250 INCHES NOMINAL IN
LOCKING FEATUREPREVAILING TORQUE WITH NONMETALLIC INSERT
NUT DIAMETER0.563 INCHES NOMINAL IN
TEMP RATING250.0 FAHRENHEIT NOMINAL DEGF
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
B-3-SInterchangeable
interchangeable cross-reference
interchangeable
CL-5-20SBP-1Interchangeable
interchangeable cross-reference
interchangeable
499191-4Interchangeable
interchangeable cross-reference
interchangeable
B107.410 CAT 48 TY1CL2Interchangeable
interchangeable cross-reference
interchangeable
J86A7/16Interchangeable
interchangeable cross-reference
interchangeable
MAY 10205Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 80586?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 80586?
80586 is a WASHER,FLAT manufactured by Hama.
What parts can replace 80586?
There are 20 known substitutes for 80586: B-3-S, CL-5-20SBP-1, 499191-4 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 80586?
80586 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-699-7006. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 80586