PartsTable
Technical Data Sheet
Download PDF

805678 — CAPACITOR,FIXED,PLASTIC DIELECTR

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

805678: CAPACITOR,FIXED,PLASTIC DIELECTR.

CAPACITOR,FIXED,PLASTIC DIELECTR. Key specifications include material: PLASTIC CASE, body_style: W/O MTG FACILITIES, AXIAL TERMINALS, body_length: 0.438 INCHES NOMINAL IN, body_diameter: 0.172 INCHES NOMINAL IN, terminal_length: 2.625 INCHES MAXIMUM IN, reliability_indicator: NOT ESTABLISHED. This part is cataloged in the U.S.

Government catalog under NSN 4730-00-012-0141, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 805678
NSN: 4730-00-012-0141
NIINs: 000120141, 008352710
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 02280 — AMERICAN HOIST AND DERRICK CO
SPECIFICATIONS
materialPLASTIC CASE
body_styleW/O MTG FACILITIES, AXIAL TERMINALS
body_length0.438 INCHES NOMINAL IN
body_diameter0.172 INCHES NOMINAL IN
terminal_length2.625 INCHES MAXIMUM IN
reliability_indicatorNOT ESTABLISHED
nonderated_operating_temp-55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC
terminal_surface_treatmentSOLDER
terminal_type_and_quantity2 UNINSULATED WIRE LEAD
tolerance_range_per_section-5.00 TO 5.00 PERCENT SINGLE SECTION
schematic_diagram_designatorNO COMMON OR GROUNDED ELECTRODE(S)
capacitance_value_per_section10000.000 PICOFARADS SINGLE SECTION
NSN4730-00-012-0141
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: 805678 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
SUBSTITUTES & CROSS-REFERENCES 8
43FS1-2Reference document
Same NSN cross-reference
Reference document — Secondary reference
J512Reference document
Same NSN cross-reference
Reference document — Secondary reference
41FS-8Reference document
Same NSN cross-reference
Reference document — Secondary reference
D9484-55-51Reference document
Same NSN cross-reference
Reference document — Secondary reference
41FS1-2Reference document
Same NSN cross-reference
Reference document — Secondary reference
SAE J512 8 010110BReference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 805678?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 805678?
805678 is a CAPACITOR,FIXED,PLASTIC DIELECTR. It is classified as a MRO (MRO_GENERAL).
What parts can replace 805678?
There are 8 known substitutes for 805678: 43FS1-2, J512, 41FS-8 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 805678?
805678 is cataloged in the U.S. Government catalog under NSN 4730-00-012-0141. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 805678