PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 8047853
8047853 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.469 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, outside_diameter: 7.000 INCHES NOMINAL IN, special_features: 2 BOLT HOLES AT 0.875 INS, aperture_diameter: 2.562 INCHES NOMINAL IN, cross-sectional_thickness: 0.093 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-125-9309, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8047853
NSN: 5330-00-125-9309
FSC: 5330
CAGE: 72915 — GENERAL MOTORS CORP ELECTRO-MOTIVE DIV (USA)
SPECIFICATIONS
hole_diameter0.469 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
outside_diameter7.000 INCHES NOMINAL IN
special_features2 BOLT HOLES AT 0.875 INS
aperture_diameter2.562 INCHES NOMINAL IN
bolt_hole_quantity4
cross-sectional_thickness0.093 INCHES NOMINAL IN
NSN5330-00-125-9309
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8047853 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 7.000 INCHES NOMINAL IN
•
APERTURE DIAMETER: 2.562 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 4
•
HOLE DIAMETER: 0.469 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
CROSS-SECTIONAL THICKNESS: 0.093 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER7.000 INCHES NOMINAL IN
SPECIAL FEATURES2 BOLT HOLES AT 0.875 INS
APERTURE DIAMETER2.562 INCHES NOMINAL IN
BOLT HOLE QUANTITY4
HOLE DIAMETER0.469 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
CROSS-SECTIONAL THICKNESS0.093 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
9LInterchangeable
interchangeable cross-reference
interchangeable
58013Interchangeable
interchangeable cross-reference
interchangeable
M1R-S1Interchangeable
interchangeable cross-reference
interchangeable
27200N PIECE 34Interchangeable
interchangeable cross-reference
interchangeable
N58013Interchangeable
interchangeable cross-reference
interchangeable
PT589Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 8047853?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8047853?
8047853 is a GASKET.
What parts can replace 8047853?
There are 7 known substitutes for 8047853: 9L, 58013, M1R-S1 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 8047853?
8047853 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-125-9309. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8047853

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026