PartsTable
Technical Data Sheet
Download PDF

80436-2N — HANDLE,BAIL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

80436-2N: HANDLE,BAIL.

The HANDLE,BAIL is a the manufacturer industrial component. Key specifications include length: 6.0000 INCHES NOMINAL IN, material: ALUMINUM ALLOY 6061 OVERALL, thread_class: 2B, thread_length: 0.3800 INCHES NOMINAL IN, overall_height: 2.7850 INCHES NOMINAL IN, mounting_method: THREADED HOLE(S). This part is cataloged in the U.S.

Government catalog under NSN 5340-01-463-3093, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
80436-2N
NSN: 5340-01-463-3093
FSC: 5340 — Hardware, Commercial
CAGE: 1YGB8 — CAREY MANUFACTURING CO, INC DBA AMATOM ELECTRONIC HARDWARE DIV AMATOM ELECTRONIC HARDWARE (USA)
SPECIFICATIONS
length6.0000 INCHES NOMINAL IN
materialALUMINUM ALLOY 6061 OVERALL
thread_class2B
thread_length0.3800 INCHES NOMINAL IN
overall_height2.7850 INCHES NOMINAL IN
mounting_methodTHREADED HOLE(S)
style_designatorRECTANGULAR SWIVEL
thread_directionRIGHT-HAND
surface_treatmentANODIZE OVERALL
nominal_thread_size0.1900 INCHES IN
thread_quantity_per_inch32
thread_series_designatorUNF
NSN5340-01-463-3093
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 80436-2N MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING FACILITY QUANTITY: 2
•
LENGTH: 6.0000 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH: 5.8000 INCHES MINIMUM AND 6.2000 INCHES MAXIMUM IN
•
MOUNTING METHOD: THREADED HOLE(S)
•
THREAD LENGTH: 0.3800 INCHES NOMINAL IN
•
STYLE DESIGNATOR: RECTANGULAR SWIVEL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT2.7850 INCHES NOMINAL IN
MOUNTING FACILITY QUANTITY2
LENGTH6.0000 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH5.8000 INCHES MINIMUM AND 6.2000 INCHES MAXIMUM IN
MOUNTING METHODTHREADED HOLE(S)
THREAD LENGTH0.3800 INCHES NOMINAL IN
STYLE DESIGNATORRECTANGULAR SWIVEL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.1900 INCHES IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
2053AS653-01Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 80436-2N?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 80436-2N?
80436-2N is a HANDLE,BAIL.
What parts can replace 80436-2N?
There is 1 known substitute for 80436-2N: 2053AS653-01. Substitute compatibility should be verified for your specific system.
What is the NSN for 80436-2N?
80436-2N is cataloged in the U.S. Government catalog under NSN 5340-01-463-3093. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 80436-2N

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.