PartsTable
Technical Data Sheet
PartsTable / MRO / 8040-2
8040-2 ✓ Verified by PartsTable
Ugreen · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

<b>48Gbps Super High Speed</b><br><br>This 8k hdmi 2.1 version cable supports bandwidth up to 48Gbps, high-speed transmission without signal loss, much faster than hdmi 2.0 and hdmi 1.4.<br><br>8K@ 60Hz HDMI 2.1 Cable<br><br>The hdmi 8k cable supports higher resolution of 8K 60Hz FUHD, and compatible with 8K 50Hz, 4K 120Hz UHD, 4K 100Hz and more, providing Ultra HD cinematic experience and 3D visual effects.<br><br>Support Dynamic HDR<br><br>This hdmi 8k cable hdr provides you more vivid picture with dynamic hdr, supporting Dolby Vision HDR, HDR 10+, etc. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-286-3597, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
MRO→ MRO_GENERAL→ 8040-2
NSN: 5305-00-286-3597
FSC: 5305
CAGE: 57712 — TELEMECHANICS INC (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING
head_styleFLAT CHAMFER
head_height0.094 INCHES NOMINAL IN
thread_class3A A
head_diameter0.188 INCHES NOMINAL IN
thread_length0.219 INCHES MINIMUM IN
screw_materialSTEEL
fastener_length0.469 INCHES NOMINAL IN
thread_directionRIGHT-HAND
internal_drive_styleCROSS RECESS TYPE 1
end_item_identificationVILLAGE MARINE TECHNOLOGY, DUPLEX STRAINER
nominal_thread_diameter0.112 INCHES IN
NSN5305-00-286-3597
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 8040-2 · Ugreen ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD DIRECTION: RIGHT-HAND
•
FASTENER LENGTH: 0.469 INCHES NOMINAL IN
•
HEAD STYLE: FLAT CHAMFER
•
THREAD LENGTH: 0.219 INCHES MINIMUM IN
•
THREAD CLASS: 3A A
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
•
HEAD HEIGHT: 0.094 INCHES NOMINAL IN
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
TECHNICAL CHARACTERISTICS (FLIS)
THREAD DIRECTIONRIGHT-HAND
FASTENER LENGTH0.469 INCHES NOMINAL IN
HEAD STYLEFLAT CHAMFER
THREAD LENGTH0.219 INCHES MINIMUM IN
THREAD CLASS3A A
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
HEAD HEIGHT0.094 INCHES NOMINAL IN
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
HEAD DIAMETER0.188 INCHES NOMINAL IN
SCREW MATERIALSTEEL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
8040-2Interchangeable
interchangeable cross-reference
interchangeable
C85-28Interchangeable
interchangeable cross-reference
interchangeable
53783DInterchangeable
interchangeable cross-reference
interchangeable
139C003H01Interchangeable
interchangeable cross-reference
interchangeable
PL 8040-1 FIND NO. 3Interchangeable
interchangeable cross-reference
interchangeable
8040-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 8040-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8040-2?
8040-2 is a COLLAR,FLARED,PIPE FITTING manufactured by Ugreen. It is classified as a MRO (MRO_GENERAL).
What parts can replace 8040-2?
There are 6 known substitutes for 8040-2: 8040-2, C85-28, 53783D and 3 more. Substitute compatibility should be verified for your specific system.
Is 8040-2 still available?
8040-2 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8040-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026