The Primer,adhesive, cataloged under National Stock Number 8040-01-383-7059, is classified within Federal Supply Class 8040 (No Item Name Available) of the Brushes, Paints, Sealers, and Adhesives group. The primary manufacturer of record is Loctite Corp. Government technical data includes 4 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 3 commercial cross-references from 3 manufacturers, enabling identification through both NSN and commercial part number lookups. 1 verified substitute exists in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 8040-01-383-7059 |
| Primary Part Number | LOCTITE 7649 |
| Item Name | Primer,adhesive |
| FSC / FSG | 8040 / 80 — No Item Name Available |
| Manufacturer | Loctite Corp |
| Status | ACTIVE |
| Hazardous Substances | ACETONE |
| Rated Drying Time | 30.0 SECONDS MINIMUM AND 70.0 SECONDS MAXIMUM |
| Specific Usage Design | USED WHERE INCREASED CURE SPEED OF LOCTITE ANAEROBIC PRODUCTS IS REQUIRED; ESP. APPLICATIONS WITH PASSIVE METALS OR INERT SURFACES AND WITH LARGE BOND GAPS; RECOMMENDED WHEN PREVAILING TEMPERATURE IS LOW (<15 DEG C) DEGC |
| Physical Form | LIQUID |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| LOCTITE 7649 PRIMARY | Loctite Corp (USA) |
| 23909559920 | Sapa Operaciones SL (ESP) |
| LMAML082C21GN/BT PRIMARY | Lockheed Martin Corporation Div Lockheed Martin Aeronautics Company (USA) |
NSN 8040-01-383-7059 is a Primer,adhesive, manufactured by Loctite Corp, classified under FSC 8040 (No Item Name Available). Status: active.
NSN 8040-01-383-7059 has 3 cross-referenced part numbers: LOCTITE 7649 (Loctite Corp), 23909559920 (Sapa Operaciones SL), LMAML082C21GN/BT (Lockheed Martin Corporation Div Lockheed Martin Aeronautics Company).
There is 1 known substitute for 8040-01-383-7059: 8030-01-152-2285. Verify interchangeability with system specifications before substitution.
Key specifications for LOCTITE 7649: Hazardous Substances: ACETONE; Rated Drying Time: 30.0 SECONDS MINIMUM AND 70.0 SECONDS MAXIMUM; Specific Usage Design: USED WHERE INCREASED CURE SPEED OF LOCTITE ANAEROBIC PRODUCTS IS REQUIRED; ESP. APPLICATIONS WITH PASSIVE METALS OR INERT SURFACES AND WITH LARGE BOND GAPS; RECOMMENDED WHEN PREVAILING TEMPERATURE IS LOW (<15 DEG C) DEGC; Physical Form: LIQUID. 5 total characteristics are documented in the Federal Logistics Information System.