PartsTable
Technical Data Sheet
Download PDF

803-6397420-69 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

803-6397420-69: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL COMP 630 OVERALL, end_radius: 0.562 INCHES NOMINAL IN, hole_shape: ROUND, shank_length: 2.000 INCHES NOMINAL IN, overall_width: 2.750 INCHES NOMINAL IN, shank_diameter: 1.750 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-413-4579, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
803-6397420-69
NSN: 5340-01-413-4579
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialSTEEL COMP 630 OVERALL
end_radius0.562 INCHES NOMINAL IN
hole_shapeROUND
shank_length2.000 INCHES NOMINAL IN
overall_width2.750 INCHES NOMINAL IN
shank_diameter1.750 INCHES NOMINAL IN
fork_span_width1.125 INCHES MINIMUM AND 1.130 INCHES MAXIMUM IN
style_designatorCLEVIS
fork_arm_thickness2.500 INCHES NOMINAL IN
securing_pin_hole_diameter0.625 INCHES MINIMUM AND 0.628 INCHES MAXIMUM IN
material_document_and_classificationASTM A564 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
distance_from_pivot_pinhole_center_to_rod_connection_end4.440 INCHES NOMINAL IN
NSN5340-01-413-4579
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 803-6397420-69 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 1.750 INCHES NOMINAL IN
•
FORK SPAN WIDTH: 1.125 INCHES MINIMUM AND 1.130 INCHES MAXIMUM IN
•
SECURING PIN HOLE DIAMETER: 0.625 INCHES MINIMUM AND 0.628 INCHES MAXIMUM IN
•
FORK ARM THICKNESS: 2.500 INCHES NOMINAL IN
•
END RADIUS: 0.562 INCHES NOMINAL IN
•
SHANK LENGTH: 2.000 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CLEVIS
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A564 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
SHANK DIAMETER1.750 INCHES NOMINAL IN
FORK SPAN WIDTH1.125 INCHES MINIMUM AND 1.130 INCHES MAXIMUM IN
SECURING PIN HOLE DIAMETER0.625 INCHES MINIMUM AND 0.628 INCHES MAXIMUM IN
FORK ARM THICKNESS2.500 INCHES NOMINAL IN
END RADIUS0.562 INCHES NOMINAL IN
SHANK LENGTH2.000 INCHES NOMINAL IN
STYLE DESIGNATORCLEVIS
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A564 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL WIDTH2.750 INCHES NOMINAL IN
HOLE SHAPEROUND
SUBSTITUTES & CROSS-REFERENCES 1
803-6397420Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 803-6397420-69?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 803-6397420-69?
803-6397420-69 is a CLEVIS,ROD END.
What parts can replace 803-6397420-69?
There is 1 known substitute for 803-6397420-69: 803-6397420. Substitute compatibility should be verified for your specific system.
What is the NSN for 803-6397420-69?
803-6397420-69 is cataloged in the U.S. Government catalog under NSN 5340-01-413-4579. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 803-6397420-69