PartsTable
Technical Data Sheet
Download PDF

803-6397392 PIECE 2 — SEAL,PLAIN

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

803-6397392 PIECE 2: SEAL,PLAIN.

The SEAL,PLAIN is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYIMIDE OVERALL, seal_width: 0.375 INCHES NOMINAL IN, construction: SOLID, housing_bore_diameter: 2.924 INCHES MINIMUM AND 2.927 INCHES MAXIMUM IN, accommodated_shaft_diameter: 1.937 INCHES NOMINAL IN, cross-sectional_shape_style: SINGLE LIP. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-361-0012, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
803-6397392 PIECE 2
NSN: 5330-01-361-0012
FSC: 5330 — Packing and Gasket Materials
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialPLASTIC POLYIMIDE OVERALL
seal_width0.375 INCHES NOMINAL IN
constructionSOLID
housing_bore_diameter2.924 INCHES MINIMUM AND 2.927 INCHES MAXIMUM IN
accommodated_shaft_diameter1.937 INCHES NOMINAL IN
cross-sectional_shape_styleSINGLE LIP
NSN5330-01-361-0012
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 803-6397392 PIECE 2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.375 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 2.924 INCHES MINIMUM AND 2.927 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: SINGLE LIP
•
ACCOMMODATED SHAFT DIAMETER: 1.937 INCHES NOMINAL IN
•
MATERIAL: PLASTIC POLYIMIDE OVERALL
•
CONSTRUCTION: SOLID
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.375 INCHES NOMINAL IN
HOUSING BORE DIAMETER2.924 INCHES MINIMUM AND 2.927 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLESINGLE LIP
ACCOMMODATED SHAFT DIAMETER1.937 INCHES NOMINAL IN
MATERIALPLASTIC POLYIMIDE OVERALL
CONSTRUCTIONSOLID
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 803-6397392 PIECE 2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 803-6397392 PIECE 2?
803-6397392 PIECE 2 is a SEAL,PLAIN.
What is the NSN for 803-6397392 PIECE 2?
803-6397392 PIECE 2 is cataloged in the U.S. Government catalog under NSN 5330-01-361-0012. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 803-6397392 PIECE 2