803-6397390 PIECE 16 — MAGNET ASSEMBLY,FILTER

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

803-6397390 PIECE 16: MAGNET ASSEMBLY,FILTER.

The MAGNET ASSEMBLY,FILTER is a the manufacturer industrial component. Key specifications include special_features: MAGNET ASSEMBLY FILTER USED IN LUBE OIL DUPLEX STRAINER ASSEMBLY. This part is cataloged in the U.S.

Government catalog under NSN 4330-01-371-2671, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

803-6397390 PIECE 16

NSN: 4330-01-371-2671
FSC: 4330 — Centrifugals, Separators, and Pressure and Vacuum Filters
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)

SPECIFICATIONS

special_features	MAGNET ASSEMBLY FILTER USED IN LUBE OIL DUPLEX STRAINER ASSEMBLY
NSN	4330-01-371-2671

COMPONENT DIAGRAM

KEY FEATURES

•

GENERAL CHARACTERISTICS ITEM DESCRIPTION: ASSEMBLY CONSISTS OF A PLATE,CRES ASTM A167,A240 TYPE 304; O/A DIA 4.66IN.,ID 3.37IN. AND 0.35IN. THICK; THREE 0.218IN,DIA THRU HOLES,120DEG APART ON A 4.095IN. BOLT CIRCLE; THREE BRACKETS CRES ASTM 276 TYPE 304,EACH IS 1.72IN. LG,0.50IN. HIGH. 0.25IN THICK,SPACED 120DEG APART AND ATTACH HAND GRIP TO PLATE WITH A 1/8IN. FILLET WELD; TWO ALNICO "V" MAGNETS 1.5IN. DIA,0.187IN. THICK WITH A CENTER HOLE OF 0.75IN DIA; SPACER CRES ASTM A312 GR TP 304,1.032IN. LG,DIA 0.75NPS SCH 40 AND SEPARATES THE TWO MAGNET RINGS; A RETAINING RING CRES (MS16624-4075) WHICH HOLDS THE TWO MAGNET RINGS AND THEIR SPACER ON THE LOWER END OF THE HAND GRIP IN

TECHNICAL CHARACTERISTICS

GENERAL CHARACTERISTICS ITEM DESCRIPTION

ASSEMBLY CONSISTS OF A PLATE,CRES ASTM A167,A240 TYPE 304; O/A DIA 4.66IN.,ID 3.37IN. AND 0.35IN. THICK; THREE 0.218IN,DIA THRU HOLES,120DEG APART ON A 4.095IN. BOLT CIRCLE; THREE BRACKETS CRES ASTM 276 TYPE 304,EACH IS 1.72IN. LG,0.50IN. HIGH. 0.25IN THICK,SPACED 120DEG APART AND ATTACH HAND GRIP TO PLATE WITH A 1/8IN. FILLET WELD; TWO ALNICO "V" MAGNETS 1.5IN. DIA,0.187IN. THICK WITH A CENTER HOLE OF 0.75IN DIA; SPACER CRES ASTM A312 GR TP 304,1.032IN. LG,DIA 0.75NPS SCH 40 AND SEPARATES THE TWO MAGNET RINGS; A RETAINING RING CRES (MS16624-4075) WHICH HOLDS THE TWO MAGNET RINGS AND THEIR SPACER ON THE LOWER END OF THE HAND GRIP IN

SPECIAL FEATURES

MAGNET ASSEMBLY FILTER USED IN LUBE OIL DUPLEX STRAINER ASSEMBLY

SUBSTITUTES & CROSS-REFERENCES 1

803-6397390Reference document

Same NSN cross-reference

Reference document — Drawing number reference only

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 803-6397390 PIECE 16?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 803-6397390 PIECE 16?

803-6397390 PIECE 16 is a MAGNET ASSEMBLY,FILTER.

What parts can replace 803-6397390 PIECE 16?

There is 1 known substitute for 803-6397390 PIECE 16: 803-6397390. Substitute compatibility should be verified for your specific system.

What is the NSN for 803-6397390 PIECE 16?

803-6397390 PIECE 16 is cataloged in the U.S. Government catalog under NSN 4330-01-371-2671. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

803-6397390 PIECE 16 — MAGNET ASSEMBLY,FILTER

Request a Quote — 803-6397390 PIECE 16