PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 803-6397247-1XX1-29(OLD)
803-6397247-1XX1-29(OLD) ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The 803-6397247-1XX1-29(OLD) is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-324-0033, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
803-6397247-1XX1-29(OLD)
NSN: 5330-01-324-0033
FSC: 5330
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
Part Number803-6397247-1XX1-29(OLD)
NSN5330-01-324-0033
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 803-6397247-1XX1-29(OLD) MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL OVERALL
•
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: MATERIAL WILL BE IN ACCORDANCE WITH SHIPS PARTS CONTROL CENTER ACTIVITY HX QUALITY CONTROL,MANUFACTURING AND TESTING SPECIFICATIONS
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
TEMP RATING: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
CENTER HOLE DIAMETER: 0.603 INCHES MINIMUM AND 0.621 INCHES MAXIMUM IN
•
PERIPHERAL DIAMETER: 0.818 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL OVERALL
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICSMATERIAL WILL BE IN ACCORDANCE WITH SHIPS PARTS CONTROL CENTER ACTIVITY HX QUALITY CONTROL,MANUFACTURING AND TESTING SPECIFICATIONS
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
TEMP RATING-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
ELONGATION PERCENTAGE125 MAXIMUM
CENTER HOLE DIAMETER0.603 INCHES MINIMUM AND 0.621 INCHES MAXIMUM IN
PERIPHERAL DIAMETER0.818 INCHES NOMINAL IN
CRITICALITY CODE JUSTIFICATIONZZZY
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
AS3569Interchangeable
interchangeable cross-reference
interchangeable
AMS-P-83461/1Interchangeable
interchangeable cross-reference
interchangeable
D35C2500003 ITEM 31Interchangeable
interchangeable cross-reference
interchangeable
803-6397247-2XXX-15Interchangeable
Same NIIN cross-reference
interchangeable
M83461/1-114(0LD)Interchangeable
Same NIIN cross-reference
interchangeable
M83461/1-114Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 803-6397247-1XX1-29(OLD)?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 803-6397247-1XX1-29(OLD)?
803-6397247-1XX1-29(OLD) is a 803-6397247-1XX1-29(OLD).
What parts can replace 803-6397247-1XX1-29(OLD)?
There are 6 known substitutes for 803-6397247-1XX1-29(OLD): AS3569, AMS-P-83461/1, D35C2500003 ITEM 31 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 803-6397247-1XX1-29(OLD)?
803-6397247-1XX1-29(OLD) is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-324-0033. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 803-6397247-1XX1-29(OLD)

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026