PartsTable
Technical Data Sheet
Download PDF

803-5959303-X-68 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

803-5959303-X-68: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, fork_depth: 1.620 INCHES NOMINAL IN, thread_class: 2B ROD CONNECTION, hole_diameter: 1.500 INCHES MINIMUM AND 1.501 INCHES MAXIMUM IN, shank_diameter: 2.980 INCHES MINIMUM AND 2.990 INCHES MAXIMUM IN, fork_span_width: 2.375 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-338-7553, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
803-5959303-X-68
NSN: 5340-01-338-7553
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialSTEEL OVERALL
fork_depth1.620 INCHES NOMINAL IN
thread_class2B ROD CONNECTION
hole_diameter1.500 INCHES MINIMUM AND 1.501 INCHES MAXIMUM IN
shank_diameter2.980 INCHES MINIMUM AND 2.990 INCHES MAXIMUM IN
fork_span_width2.375 INCHES NOMINAL IN
thread_directionRIGHT-HAND ROD CONNECTION
fork_arm_thickness0.812 INCHES NOMINAL IN
nominal_thread_size0.375 INCHES SECURING PIN HOLE IN
thread_quantity_per_inch8 ROD CONNECTION
thread_series_designatorUNF ROD CONNECTION
material_document_and_classificationMIL-S-21952,HY 80 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5340-01-338-7553
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 803-5959303-X-68 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 2.980 INCHES MINIMUM AND 2.990 INCHES MAXIMUM IN
•
FORK SPAN WIDTH: 2.375 INCHES NOMINAL IN
•
FORK ARM THICKNESS: 0.812 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-21952,HY 80 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND ROD CONNECTION
•
NOMINAL THREAD SIZE: 1.750 INCHES ROD CONNECTION IN
•
THREAD CLASS: 2B ROD CONNECTION
TECHNICAL CHARACTERISTICS
SHANK DIAMETER2.980 INCHES MINIMUM AND 2.990 INCHES MAXIMUM IN
FORK SPAN WIDTH2.375 INCHES NOMINAL IN
FORK ARM THICKNESS0.812 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-21952,HY 80 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND ROD CONNECTION
NOMINAL THREAD SIZE1.750 INCHES ROD CONNECTION IN
NOMINAL THREAD SIZE0.375 INCHES SECURING PIN HOLE IN
THREAD CLASS2B ROD CONNECTION
THREAD QUANTITY PER INCH8 ROD CONNECTION
MATERIALSTEEL OVERALL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
5959303-68Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 803-5959303-X-68?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 803-5959303-X-68?
803-5959303-X-68 is a CLEVIS,ROD END.
What parts can replace 803-5959303-X-68?
There is 1 known substitute for 803-5959303-X-68: 5959303-68. Substitute compatibility should be verified for your specific system.
What is the NSN for 803-5959303-X-68?
803-5959303-X-68 is cataloged in the U.S. Government catalog under NSN 5340-01-338-7553. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 803-5959303-X-68