PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 803-5184193
803-5184193 ✓ Verified by PartsTable
— · GATE VALVE
WHAT YOU NEED TO KNOW
Full open or full close only — never throttle Rising stem shows position visually
Throttling a gate valve erodes seats
PRODUCT OVERVIEW

The VALVE,GLOBE is a the manufacturer industrial component. Key specifications include material: STEEL UNS K11572 BODY, bonnet_type: OUTSIDE SCREW-YOKE, bore_diameter: 0.5000 INCHES NOMINAL IN, overall_length: 0.750 INCHES NOMINAL IN, connection_type: UNTHREADED INTERNAL PIPE ALL ENDS, bore_countersink: INCLUDED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4820-00-138-1879, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
803-5184193
NSN: 4820-00-138-1879
FSC: 4820
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialSTEEL UNS K11572 BODY
bonnet_typeOUTSIDE SCREW-YOKE
bore_diameter0.5000 INCHES NOMINAL IN
overall_length0.750 INCHES NOMINAL IN
connection_typeUNTHREADED INTERNAL PIPE ALL ENDS
bore_countersinkINCLUDED
connection_styleSOCKET ALL ENDS
special_featuresLEVEL I REQUIREMENTS DO NOT APPLY
style_designatorSTRAIGHT THRU
operating_pressure1500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
flow_control_deviceDISK
countersink_diameter0.530 INCHES NOMINAL IN
NSN4820-00-138-1879
COMPONENT DIAGRAM
GATE VALVE — FULL OPEN OR FULL CLOSE ONLY Rising STEM BONNET FLOW → → FLOW SEATS — — SIZE: — · — · — PN: 803-5184193 · OEM ⚠ VERIFY BEFORE ORDERING Gate valves = FULL OPEN or FULL CLOSE only — never throttle. Partial opening causes seat erosion and vibration. ✓ BROKER TIP Rising stem shows valve position visually — easier maintenance. Non-rising stem saves headroom. PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
VALVE OPERATION METHOD: MANUAL
•
MAXIMUM OPERATING TEMP: 775.0 FAHRENHEIT SINGLE RESPONSE DEGF
•
BONNET ATTACHMENT METHOD: BOLTED
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-17131,MIL-RCOCR-A MIL SPEC SINGLE MATERIAL RESPONSE SEAT
•
FLOW CONTROL DEVICE: DISK
•
MATERIAL: STEEL CORROSION RESISTING STEM
•
NOMINAL PIPE SIZE ACCOMMODATED: 1.500 INCHES ALL ENDS IN
TECHNICAL CHARACTERISTICS (FLIS)
VALVE OPERATION METHODMANUAL
MAXIMUM OPERATING TEMP775.0 FAHRENHEIT SINGLE RESPONSE DEGF
BONNET ATTACHMENT METHODBOLTED
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-17131,MIL-RCOCR-A MIL SPEC SINGLE MATERIAL RESPONSE SEAT
FLOW CONTROL DEVICEDISK
MATERIALSTEEL CORROSION RESISTING STEM
NOMINAL PIPE SIZE ACCOMMODATED1.500 INCHES ALL ENDS IN
MATERIALSTEEL FLOW CONTROL DEVICE
TEST DATA DOCUMENT81349-MIL-S-901 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
OPERATING PRESSURE1500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
CS4820-0014GJNRXInterchangeable
Same NIIN cross-reference
interchangeable
MILV22094Interchangeable
Same NIIN cross-reference
interchangeable
S-807-26/807-1600REV7/882039421Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 803-5184193?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 803-5184193?
803-5184193 is a VALVE,GLOBE.
What parts can replace 803-5184193?
There are 3 known substitutes for 803-5184193: CS4820-0014GJNRX, MILV22094, S-807-26/807-1600REV7/882039421. Substitute compatibility should be verified for your specific system.
What is the NSN for 803-5184193?
803-5184193 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4820-00-138-1879. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 803-5184193

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026