PartsTable
Technical Data Sheet
PartsTable / O-RING / 803-1385714-5-05

803-1385714-5-05 — Technical Data Sheet

✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include criticality_code_justification: ZZZY, reference_number_differentiating_characteristics: CLEANED IN ACCORDANCE WITH MIL-C-52211. This part is cataloged in the Federal Logistics Information System under NSN 5331-00-492-0575, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
803-1385714-5-05
NSN: 5331-00-492-0575
FSC: 5331 — O-RING
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
criticality_code_justificationZZZY
reference_number_differentiating_characteristicsCLEANED IN ACCORDANCE WITH MIL-C-52211
NSN5331-00-492-0575
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 803-1385714-5-05 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
HARDNESS RATING: 80.0 SHORE DUROMETER A NOMINAL
•
OUTSIDE DIAMETER: 1.734 INCHES MINIMUM AND 1.776 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 1.534 INCHES MINIMUM AND 1.564 INCHES MAXIMUM IN
•
MATERIAL: RUBBER ETHYLENE-PROPYLENE CLASS EPM
•
TEMP RATING: -70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
HARDNESS RATING80.0 SHORE DUROMETER A NOMINAL
OUTSIDE DIAMETER1.734 INCHES MINIMUM AND 1.776 INCHES MAXIMUM IN
CENTER HOLE DIAMETER1.534 INCHES MINIMUM AND 1.564 INCHES MAXIMUM IN
MATERIALRUBBER ETHYLENE-PROPYLENE CLASS EPM
TEMP RATING-70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
VERIFIED SUBSTITUTES & CROSS-REFERENCES 28
NAS1611-129InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
5331PL2182391InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
NAS1613InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
2-134E540-80InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
CAT. ORD. 5700InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
2-130 E540-80InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLEDGOVERNMENT REGISTRY
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 803-1385714-5-05?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 803-1385714-5-05?
803-1385714-5-05 is a PACKING,PREFORMED.
What parts can replace 803-1385714-5-05?
There are 28 known substitutes for 803-1385714-5-05: NAS1611-129, 5331PL2182391, NAS1613 and 25 more. Substitute compatibility should be verified for your specific system.
Is 803-1385714-5-05 still available?
803-1385714-5-05 is currently cancelled.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 803-1385714-5-05

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026