PartsTable
Technical Data Sheet
Download PDF

8031-38-554-1082 — VALVE,ANGLE

✓ Government record, cited
— · GATE VALVE
PRODUCT OVERVIEW

8031-38-554-1082: VALVE,ANGLE.

The VALVE,ANGLE is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY SEAT, valve_size: 8.000 INCHES IN, bonnet_type: OUTSIDE SCREW-YOKE, flange_shape: ROUND WITH HOLES FIRST END, connection_type: FLANGE FIRST END, style_designator: ANGLE FLANGED ENDS. This part is cataloged in the U.S.

Government catalog under NSN 4820-00-273-8918, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8031-38-554-1082
NSN: 4820-00-273-8918
FSC: 4820 — Valves, Nonpowered
CAGE: 80064 — NAVAL SHIP SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialNICKEL ALLOY SEAT
valve_size8.000 INCHES IN
bonnet_typeOUTSIDE SCREW-YOKE
flange_shapeROUND WITH HOLES FIRST END
connection_typeFLANGE FIRST END
style_designatorANGLE FLANGED ENDS
features_providedBONNET PACKING
nominal_thickness0.675 INCHES FIRST END IN
bolt_hole_quantity14 FIRST END
flange_face_designPLAIN FIRST END
operating_pressure100.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
flow_control_deviceDISK
NSN4820-00-273-8918
COMPONENT DIAGRAM
GATE VALVE — FULL OPEN OR FULL CLOSE ONLY Rising STEM BONNET FLOW → → FLOW SEATS — — SIZE: — · — · — PN: 8031-38-554-1082 · OEM ⚠ VERIFY BEFORE ORDERING Gate valves = FULL OPEN or FULL CLOSE only — never throttle. Partial opening causes seat erosion and vibration. ✓ BROKER TIP Rising stem shows valve position visually — easier maintenance. Non-rising stem saves headroom. PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLOW CONTROL DEVICE: DISK
•
FLANGE SHAPE: ROUND WITH HOLES FIRST END
•
RENEWABLE SEAT RING TYPE: THREADED
•
FLANGE FACE DESIGN: PLAIN FIRST END
•
BOLT CIRCLE NOMINAL DIAMETER: 11.062 INCHES FIRST END IN
•
CONNECTION TYPE: FLANGE FIRST END
•
STYLE DESIGNATOR: ANGLE FLANGED ENDS
•
BOLT HOLE NOMINAL DIAMETER: 0.688 INCHES FIRST END IN
TECHNICAL CHARACTERISTICS
FLOW CONTROL DEVICEDISK
FLANGE SHAPEROUND WITH HOLES FIRST END
RENEWABLE SEAT RING TYPETHREADED
FLANGE FACE DESIGNPLAIN FIRST END
BOLT CIRCLE NOMINAL DIAMETER11.062 INCHES FIRST END IN
CONNECTION TYPEFLANGE FIRST END
STYLE DESIGNATORANGLE FLANGED ENDS
BOLT HOLE NOMINAL DIAMETER0.688 INCHES FIRST END IN
OPERATING PRESSURE100.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
VALVE SIZE8.000 INCHES IN
SUBSTITUTES & CROSS-REFERENCES 1
5000S4824-1385541Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)Demilitarization required — critical (Q)
Ready to buy 8031-38-554-1082?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8031-38-554-1082?
8031-38-554-1082 is a VALVE,ANGLE.
What parts can replace 8031-38-554-1082?
There is 1 known substitute for 8031-38-554-1082: 5000S4824-1385541. Substitute compatibility should be verified for your specific system.
What is the NSN for 8031-38-554-1082?
8031-38-554-1082 is cataloged in the U.S. Government catalog under NSN 4820-00-273-8918. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8031-38-554-1082