PartsTable
Technical Data Sheet
Download PDF

80282-09 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

80282-09: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: CELLULOSE OVERALL, hole_diameter: 0.438 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, aperture_width: 3.750 INCHES NOMINAL IN, aperture_length: 5.500 INCHES NOMINAL IN, bearing_surface_width: 0.750 INCHES NOMINAL IN, cross-sectional_thickness: 0.015 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-073-8380, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
80282-09
NSN: 5340-00-073-8380
NIINs: 000738380, 003661204
FSC: 5340 — Hardware, Commercial
CAGE: 35351 — GE AVIATION SYSTEMS LLC (USA)
SPECIFICATIONS
materialCELLULOSE OVERALL
hole_diameter0.438 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
aperture_width3.750 INCHES NOMINAL IN
aperture_length5.500 INCHES NOMINAL IN
bearing_surface_width0.750 INCHES NOMINAL IN
cross-sectional_thickness0.015 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5340-00-073-8380
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 80282-09 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 1.213 INCHES NOMINAL IN
•
END STYLE: PLAIN END WITH HOLE (S)
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/8 FED SPEC SINGLE MATERIAL RESPONSE
•
BASIC SHAPE STYLE: FLAT
•
WIDTH: 0.125 INCHES NOMINAL IN
•
MATERIAL: ALUMINUM ALLOY 5052
•
HOLE QUANTITY: 1
TECHNICAL CHARACTERISTICS
LENGTH1.213 INCHES NOMINAL IN
END STYLEPLAIN END WITH HOLE (S)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/8 FED SPEC SINGLE MATERIAL RESPONSE
BASIC SHAPE STYLEFLAT
SPECIAL FEATURESHOLE END ROUNDED TO 0.187 IN. DIA IN
WIDTH0.125 INCHES NOMINAL IN
MATERIALALUMINUM ALLOY 5052
HOLE QUANTITY1
HOLE DIAMETER0.120 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
THICKNESS0.022 INCHES MINIMUM AND 0.028 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 2
180282-09Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
5340PL1524728Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 80282-09?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 80282-09?
80282-09 is a GASKET.
What parts can replace 80282-09?
There are 2 known substitutes for 80282-09: 180282-09, 5340PL1524728. Substitute compatibility should be verified for your specific system.
What is the NSN for 80282-09?
80282-09 is cataloged in the U.S. Government catalog under NSN 5340-00-073-8380. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 80282-09

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.