PartsTable
Technical Data Sheet
PartsTable / MRO / 802757
802757 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The RESISTOR,FIXED,COMPOSITION is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 HUB, bore_style: PLAIN BOTH ENDS, tooth_form: STANDARD, body_length: 0.250 INCHES NOMINAL IN, body_diameter: 0.090 INCHES NOMINAL IN, hole_diameter: 0.221 INCHES MINIMUM AND 0.232 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-022-1195, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 802757
NSN: 5310-00-022-1195
FSC: 5310
CAGE: 16764 — GENERAL MOTORS CORP DELCO REMY DIV (USA)
SPECIFICATIONS
materialSTEEL COMP 303 HUB
bore_stylePLAIN BOTH ENDS
tooth_formSTANDARD
body_length0.250 INCHES NOMINAL IN
body_diameter0.090 INCHES NOMINAL IN
hole_diameter0.221 INCHES MINIMUM AND 0.232 INCHES MAXIMUM IN
terminal_typeWIRE LEAD
inclosure_typeENCAPSULATED
pitch_diameter1.2222 INCHES NOMINAL IN
pressure_angle20.0000 DEGREES
teeth_quantity88
outside_diameter0.364 INCHES NOMINAL IN
NSN5310-00-022-1195
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 802757 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 0.364 INCHES NOMINAL IN
•
NONDEFINITIVE SPEC/STD DATA: A CLASS AND 1 STYLE
•
STYLE DESIGNATOR: SPLIT HELICAL-RIGHT HAND
•
MATERIAL THICKNESS: 0.047 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.221 INCHES MINIMUM AND 0.232 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 1060 OR STEEL COMP 1065 OR STEEL COMP 1070 OR STEEL COMP 1075 OR STEEL COMP 1080 OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633,FS 1060 TO FS 1080 CANCELED FED SPEC SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER0.364 INCHES NOMINAL IN
NONDEFINITIVE SPEC/STD DATAA CLASS AND 1 STYLE
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
MATERIAL THICKNESS0.047 INCHES NOMINAL IN
SPECIAL FEATURESSURFACE TREATMENT BLUED
HOLE DIAMETER0.221 INCHES MINIMUM AND 0.232 INCHES MAXIMUM IN
MATERIALSTEEL COMP 1060 OR STEEL COMP 1065 OR STEEL COMP 1070 OR STEEL COMP 1075 OR STEEL COMP 1080 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-633,FS 1060 TO FS 1080 CANCELED FED SPEC SINGLE MATERIAL RESPONSE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
443-1466-101Interchangeable
interchangeable cross-reference
interchangeable
5C127-21541Interchangeable
interchangeable cross-reference
interchangeable
10120267Interchangeable
interchangeable cross-reference
interchangeable
00044Interchangeable
interchangeable cross-reference
interchangeable
221195Interchangeable
interchangeable cross-reference
interchangeable
284W2T8Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 802757?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 802757?
802757 is a RESISTOR,FIXED,COMPOSITION. It is classified as a MRO (MRO_GENERAL).
What parts can replace 802757?
There are 10 known substitutes for 802757: 443-1466-101, 5C127-21541, 10120267 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 802757?
802757 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-022-1195. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 802757

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026