PartsTable
Technical Data Sheet
Download PDF

8027-6CP — SCREW,CAP,HEXAGON HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

8027-6CP: SCREW,CAP,HEXAGON HEAD.

The SCREW,CAP,HEXAGON HEAD is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, head_style: HEXAGON, head_height: 0.375 INCHES NOMINAL IN, fastener_length: 2.625 INCHES NOMINAL IN, thread_direction: RIGHT-HAND, width_between_flats: 0.750 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-063-7237, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8027-6CP
NSN: 5305-01-063-7237
FSC: 5305 — Screws
CAGE: 03950 — NAVAL INVENTORY CONTROL POINT MECHANICSBURG (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
head_styleHEXAGON
head_height0.375 INCHES NOMINAL IN
fastener_length2.625 INCHES NOMINAL IN
thread_directionRIGHT-HAND
width_between_flats0.750 INCHES NOMINAL IN
nominal_thread_diameter0.625 INCHES IN
thread_quantity_per_inch18
criticality_code_justificationZZZY
reference_number_differentiating_characteristicsCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
NSN5305-01-063-7237
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 8027-6CP · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.375 INCHES NOMINAL IN
•
FASTENER LENGTH: 2.625 INCHES NOMINAL IN
•
CRITICALITY CODE JUSTIFICATION: ZZZY
•
NOMINAL THREAD DIAMETER: 0.625 INCHES IN
•
HEAD STYLE: HEXAGON
•
THREAD DIRECTION: RIGHT-HAND
•
WIDTH BETWEEN FLATS: 0.750 INCHES NOMINAL IN
•
THREAD QUANTITY PER INCH: 18
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.375 INCHES NOMINAL IN
FASTENER LENGTH2.625 INCHES NOMINAL IN
CRITICALITY CODE JUSTIFICATIONZZZY
NOMINAL THREAD DIAMETER0.625 INCHES IN
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS0.750 INCHES NOMINAL IN
THREAD QUANTITY PER INCH18
MATERIALCOPPER ALLOY OVERALL
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICSCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
SUBSTITUTES & CROSS-REFERENCES 1
8027-6Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 8027-6CP?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8027-6CP?
8027-6CP is a SCREW,CAP,HEXAGON HEAD.
What parts can replace 8027-6CP?
There is 1 known substitute for 8027-6CP: 8027-6. Substitute compatibility should be verified for your specific system.
What is the NSN for 8027-6CP?
8027-6CP is cataloged in the U.S. Government catalog under NSN 5305-01-063-7237. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8027-6CP

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.