PartsTable
Technical Data Sheet
Download PDF

802496 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

802496: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.281 INCHES NOMINAL IN, material: STEEL BAND, overall_width: 1.500 INCHES NOMINAL IN, overall_length: 5.000 INCHES NOMINAL IN, special_features: TW0 0.344 IN. BY 0.563 IN.

MOUNTING HOLES IN, style_designator: CENTER MOUNT. This part is cataloged in the U.S. Government catalog under NSN 5340-00-736-9881, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
802496
NSN: 5340-00-736-9881
FSC: 5340 — Hardware, Commercial
CAGE: 34623 — AM GENERAL LLC (USA)
SPECIFICATIONS
diameter0.281 INCHES NOMINAL IN
materialSTEEL BAND
overall_width1.500 INCHES NOMINAL IN
overall_length5.000 INCHES NOMINAL IN
special_featuresTW0 0.344 IN. BY 0.563 IN. MOUNTING HOLES IN
style_designatorCENTER MOUNT
tongue_hole_typeROUND, UNTHREADED
material_thickness0.0897 INCHES NOMINAL IN
loop_inside_diameter2.250 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end2.500 INCHES NOMINAL IN
center_to_center_distance_between_first_and_second_holes3.750 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole1.875 INCHES NOMINAL IN
NSN5340-00-736-9881
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 802496 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: CENTER MOUNT
•
DIAMETER: 0.281 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.0897 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 2.500 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND HOLES: 3.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORCENTER MOUNT
DIAMETER0.281 INCHES NOMINAL IN
OVERALL LENGTH5.000 INCHES NOMINAL IN
OVERALL WIDTH1.500 INCHES NOMINAL IN
MATERIAL THICKNESS0.0897 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END2.500 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND HOLES3.750 INCHES NOMINAL IN
SPECIAL FEATURESTW0 0.344 IN. BY 0.563 IN. MOUNTING HOLES IN
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.875 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
7369881Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
28717Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 802496?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 802496?
802496 is a CLAMP,LOOP.
What parts can replace 802496?
There are 2 known substitutes for 802496: 7369881, 28717. Substitute compatibility should be verified for your specific system.
What is the NSN for 802496?
802496 is cataloged in the U.S. Government catalog under NSN 5340-00-736-9881. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 802496