PartsTable
Technical Data Sheet
8022091 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CONNECTOR,RECEPTACLE,ELECTRICAL. Key specifications include material: ALUMINUM, design_type: THREADED, thread_class: 3B, overall_width: 6.722 INCHES NOMINAL IN, overall_height: 7.625 INCHES NOMINAL IN, overall_length: 9.277 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-034-7951, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8022091
NSN: 5340-00-034-7951
FSC: 5340
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
materialALUMINUM
design_typeTHREADED
thread_class3B
overall_width6.722 INCHES NOMINAL IN
overall_height7.625 INCHES NOMINAL IN
overall_length9.277 INCHES NOMINAL IN
case_design_typeSEALED
overall_diameter1.438 INCHES NOMINAL IN
special_featuresMIN WEIGHT 33.1 LBS.; INTERNAL RESISTANCE .0030 OHMS; RESERVE CAPACITY: 90 MINUTES; CRANKING AMPS @ 32 DEGREES F 925 LBS
voltage_in_volts12.0
ampere_hour_capacity46.00
time_capacity_in_hours20.00
NSN5340-00-034-7951
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8022091 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
DESIGN TYPE: THREADED
ROUND CAP OUTSIDE SURFACE CONDITION: SERRATED
NONDEFINITIVE SPEC/STD DATA: 2 TYPE AND 16 SIZE
THREAD SIZE AND SERIES/TYPE DESIGNATOR: 1-5/16-12 UN
THREAD CLASS: 3B
DEPARTURE FROM CITED DOCUMENT: AS MODIFIED BY SURFACE TREATMENT
MATERIAL: ALUMINUM
OVERALL DIAMETER: 1.438 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
DESIGN TYPETHREADED
ROUND CAP OUTSIDE SURFACE CONDITIONSERRATED
NONDEFINITIVE SPEC/STD DATA2 TYPE AND 16 SIZE
THREAD SIZE AND SERIES/TYPE DESIGNATOR1-5/16-12 UN
THREAD CLASS3B
DEPARTURE FROM CITED DOCUMENTAS MODIFIED BY SURFACE TREATMENT
MATERIALALUMINUM
OVERALL DIAMETER1.438 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
75/25Upgraded Successor
successor cross-reference
successor
8022-091/MDL. NO. 75/25Upgraded Successor
successor cross-reference
successor
75/35Upgraded Successor
successor cross-reference
successor
170Interchangeable
interchangeable cross-reference
interchangeable
35000Interchangeable
interchangeable cross-reference
interchangeable
K50Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 8022091?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8022091?
8022091 is a CONNECTOR,RECEPTACLE,ELECTRICAL.
What parts can replace 8022091?
There are 24 known substitutes for 8022091: 75/25, 8022-091/MDL. NO. 75/25, 75/35 and 21 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 8022091?
8022091 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-034-7951. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8022091